Choose the size cover you need above. The prices will vary according to style and sizing. They run from $49.99 to $99.99 per cover.

Details Include:

• Black canvas fabric material
• Slotted area for both the spring pull back plungers and gun style
• Hook and loop connection that connects the top cover to the bottom cover ensuring full coverage
• Sewn-in magnets provide a magnetic connection that attaches the cover in the back to the leg and either the steel hinge material or the side rails on the top. Depending on the machine brand and length it may leave up to a 1/2" towards the back still exposed but the buttons can move around in their sewn-in pocket a little bit
• Standard fits machines that are roughly 22 3/8" wide such as most 90's to late model Stern's, Ballys, Williams etc. ,Standard cover fits machine bodies that measure roughly 22 3/8" wide x 51" long on the side and 46 1/2" long on the glass top area, This cover fits back boxes that measure roughly 29" wide x 10" deep that taper down to 6 1/2" deep and 28 3/4" tall
• Widebody fits machine bodies that measure roughly 25 1/4" wide x 51" long on the side and 46 1/2" long on the glass top area and the back boxes that measure roughly 29" wide x 10" deep that taper down to 6 1/2" deep and 28 3/4" tall
• Widebody Topper fits late model 90s machines and newer that have a topper on them. The cabinet cover measures roughly 50 1/2" long x 16 3/8" high towards the front tapering to the back at 22" high x 26" wide across the front. The back box measures roughly 28 1/4" wide x 37" high x 10" deep.
• Wedgehead fits a variety of Gottlieb machines made from the 60s thur the late 70s. Some of these machines have a body of 13" high while the later models were as high as 17" these covers are 16" high to make it work with both variations. The cabinet covers measure 51" long x 16" high and 22" across the front. The back box cover measures roughly 25" wide x 27 1/2" high x 8 5/8" deep. These go on very snug at first because they are tapered down towards the bottom. Putting the covers on the top are tight at first because of the design
• 70s-80s Bally Stern fits most 4 player EM and solid state games made in that era. Late 70s and early 80s Such as a Wizard, Captain Fantastic, Mata Hari and others like that. The cabinet cover measures roughly 49 1/2" long x 17 1/2" high x 22" wide across the front. The back box head cover measures roughly 29 3/4" wide x 29 3/4" high x 11: deep
• 80s Bally Williams Widebody fits most 4 player EM and solid state games made in that era. Such as a Paragon, Hotdoggin and others like that. The cabinet cover measures roughly 49 1/2" long x 17 1/2" high x 28 3/4" wide across the front. The back box head cover measures roughly 29 3/4" wide x 29 3/4" high x 11: deep
• 60s-70s 1 Player EM fits most single player electro mechanical machines from the 60s and 70s. Please note on some of the bally 70s style the side rail doesn't go all the way to the back of the machine because they have the lift up frame and glass so the built-in magnets don't touch ( you can put your own magnets in place tohold towards the front if you wish) The cabinet cover measures roughly 51" long x 17 1/2" high x 22" wide across the front. The back box measures roughly 28 1/4" wide x 28 1/2" high x 12" deep.fits most two and four player electro mechanical machines from the 60s and 70s. Please note on some of the bally 70s style the side rail doesn't go all the way to the back of the machine because they have the lift up frame and glass so the built-in magnets don't touch ( you can put your own magnets in place to hold towards the front if you wish) The cabinet cover measures roughly 52" long x 18 1/2" high x 22 1/4" wide across the front. The back box measures roughly 24" wide x 31" high x 11" deep
• 60s-70s 2-4 Player EM fits most two and four player electro mechanical machines from the 60s and 70s. Please note on some of the bally 70s style the side rail doesn't go all the way to the back of the machine because they have the lift up frame and glass so the built-in magnets don't touch ( you can put your own magnets in place to hold towards the front if you wish) The cabinet cover measures roughly 52" long x 18 1/2" high x 22 1/4" wide across the front. The back box measures roughly 29" wide x 28" high x 11" deep
• Stern Newer fits most of the newer stern models. Since the backbox hinge is right under the back box the magnets that hold in place will leave the top back corner not attached.
• Data East fits most Data east model pinball machines.
• Jersey jack fits most Jersey Jack pinball machines.
• This listing is for the two piece cover set only (The pinball machine and dolly is not included) the photographs are for looks and reference only
• Manufacturer's look and details may vary