Illuminated red mildot type reticule with 1 to 11 adjustable brightness settings. The strongest setting at level 11 is only visible in very poor light. Intensity level 1 is only visible in total darkness 1 hour before sunrise or after sunset.

Body: 30 mm (requires 30 mm mounts) Zoom: 1.5x to 6x Length: 289 mm Weight: 550 g Diameter: 42 mm Exit pupil: 26 - 5 mm Field of view at 100 m: 21 - 5.2 m Eye relief: 100 mm Illuminated reticle: Yes, 11 settings, 1 CR2032 battery turret adjustment: 1/4 MOA, 7 mm at 100 m Focus adjustment: Yes Twilight factor: 7.93 - 15.88 Operating temperature: -20°C to +70°C Anti fog: nitrogen filled Surface treatment: hard anodized, anti-scratch

Battery not supplied (1x CR2032) Scope mounts not included. We recommend you contact a gunsmith for mounting the scope on the rifle. CAUTION: Maximum distance between mounts for standard fitting: 125 mm If the spacing on your rifle is greater than 125 mm, choose mounts with offset rings. When mounting the scope, ensure there is at least 8cm between your eye and the edge of the scope when the rifle is on the shoulder.

Each turret click moves the point of impact 7 mm on the target at a range of 100 m. Remove the metal caps, turn the turrets in the direction you wish to move the point of impact. To raise the point of impact, turn towards U (UP). To lower the point of impact, turn towards D (DOWN). To the left, turn towards L (Left). To the right, turn towards R (Right)