NEW LOWER PRICE
For every 1 litre it will strip approximately 5 metres - depending upon the number of layers of paint to be removed.
MODEL ENTHUSIASTS - This product will strip the paint from plastic models without damage to the underlying substrate.
Note: Biostrip 20 will weaken resin and glue.
Product Benefits include:
Water-based - no losses due to evaporation.
Economical in use - thixotropic (thickened) solution clings to vertical surfaces - no drips or runs, hence no waste.
Non Toxic - safer for the user and the environment.
Non Caustic - does not darken wood.
pH Neutral - does not cause burns.
Non Flammable, Non Corrosive
Does not give off hazardous or noxious fumes - ventilation not required. Suitable for use indoors and in confined spaces.
Suitable Substrates | Coatings Removed | |
All Wood Types | Polyester and epoxy powder coatings | |
| Water based coatings | |
Stone | Varnish | |
Brick | Primers (including aerospace) | |
Marble | Chrome containing primers | |
Concrete | Oil based paints | |
| Emulsion | |
Usage Instructions:
Apply Biostrip 20™ generously onto painted areas. Allow to blister (time will vary, depending upon paint type, paint thickness and ambient temperature). Remove softened paint by either rinsing or scraping. Repeat process as necessary.
Wash down area and allow to dry thoroughly.
500g will cover up to 2-3 sq meters.
TIP: Let Biostrip do the hard work - as long as it's not allowed to dry out it will continue working without damaging the underlying surface. Leave in place until paint has completely softened
NOTE: Biostrip is not suitable for bicycle/automotive paint, please contact us for further advise on treating these surfaces.
We recommend treating a small test area before starting any project.
Formulated, manufactured and stocked in the UK.