Features:
- Superheterodyne acceptance module, the radio is stable, the remote control distance and sensitivity are not affected by the climatic environment and other factors, which is impossible for other products that accept the circuit.
- Digital coding, using imported digital IC chips for encoding, will not interfere with each other, and will not be affected by external obstacles.
- Easy to install, just need to connect our remote control switch to the light fixture or small appliance, you can realize remote control, no need to code.
- Remote control by wall, wireless remote control can be carried out by partition wall.
- Intelligent learning, power on, red indicator light, press the learning button, the learning indicator lights, press any button on the remote control, the learning indicator flashes, the relay emits an action sound, and the learning is completed.
Specification:
Product Name: 12V single way one for four wireless remote control switch
Product model: CJY-1201C one for four
Product weight: 147 g / 5.18 oz
Receiver size: approx. 5 * 3.5 * 2 cm / 1.96 * 1.37 * 0.78 in
Type: one for four wireless remote control switch
Working voltage: DC12V
Working frequency: 433.92MHz
Total load power: 800W / road
Remote control distance: 100 meters
Working temperature: -15 - 75 (°C)
Working mode: Jog, interlock, self-locking, delay 5 seconds, 10 seconds, 15 seconds, 20 seconds
Coding method: learning type
Modulation method: ASK
Functional Description: Controlling the opening/closing of electromechanical equipment and household appliances
Package list:
1 * Remote Control
4 * Controller
Learning the code:
1. Jog learning method:
Press the control board code pair button once, the LED indicator flashes once, and when the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times.
2. Self-locking learning method:
Press the control board code button twice in succession. The LED indicator flashes twice. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times.
3. Interlocking learning method:
Press the control board code button three times in succession. The LED indicator flashes 3 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times.
4. Delay 5 seconds learning method:
Press the control board code button 4 times in succession. The LED indicator flashes 4 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times.
5. Delay 10 seconds learning method:
Press the control board code button 5 times in succession. The LED indicator flashes 5 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times.
6. Delay 15 seconds learning method:
Press the control board code button 6 times in succession. The LED indicator flashes 6 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times.
7. Delay 20 seconds learning method:
Press the control board code button 7 times in succession. The LED indicator flashes 7 times. When the LED indicator lights up, press the remote control button that needs to be coded. The LED of the control panel flashes continuously for 3 times.
Precautions:
1. Do not operate with power. Turn off the power to operate, and use it after the test is confirmed to be correct.
2. When the voltage of the remote control is insufficient, please change the battery in time (the remote control distance becomes closer when the remote control battery voltage is insufficient).
3. When using wireless electronic products, care should be taken to avoid metal masks, large electronic devices, electromagnetic fields, etc., which have strong interference sources, to avoid remote control and short receiving distance or to work normally.
4. Do not use this electronic product abnormally. Abnormal use will reduce the performance and longevity of the product. In severe cases, damage to the product will also bring hidden dangers to your safety.
Features:
The wireless remote control switch adopts Radio Frequency Identification technology, which is mainly used for remote wireless home appliance control.
Selectable working modes - Jog / Self-locking / Interlock.
It can control one or more devices in the room, and the performance is stable and reliable.
Easy to use.
Remote control distance: 100 meters in open area.
Specification:
Type: 12V Wireless Remote control switch single controller
Weight: about 57g (controller + remote control)
Size: about 3.9x3.6x2.5cm
Type: Single One-way remote control switch
Working voltage: 12V
Working frequency: 433MHZ
Total load power: 10A
Remote control distance: 100M
Working temperature: -15-75℃
Package list:
1 * Remote Control
1 * Switch
Note:
1. Please allow slight error due to manual measurement.
2. Different monitor colors may be different. Thanks for your kind understanding.
Output Mode:
1. Self-locking: Press the same remote control button, press once, the relay is on, press again, the relay is off.
2. Interlock: Press the "A" button on the remote control, the relay will open, press the "B" button on the remote control, and the relay will be off.
3. Jog: Press the "A" button on the remote control, the relay will open, release the "A" button on the remote control, and the relay will be off. If you keep pressing the "A" button, the remote control is always on. When will it be released then when the relay is off.
Remote Control:
1. Clear code: Press and hold the learning button, the indicator light is on. After about 8 seconds, the indicator light flashes 3 times and then off, indicating that the clearing is successful. The remote controllers that were paired before being erased are all deleted.
2. Working mode selection: The switching mode of this switch is changed by using the jumper cap. The jumper cap is not inserted into the jog mode, inserted in the middle of the T is self-locking, inserted in the L and the middle is interlocked.
3. Learn to match the remote control: Press the learning button, the indicator light is on, then press the remote control button to be matched, the indicator light flashes 3 times and then the corresponding remote control is successfully paired.
If there's multiple remote controls, just repeat step 3 without clearing the code.
The wireless remote control switch adopts Radio Frequency Identification technology, which is mainly used for remote wireless home appliance control.
Selectable working modes - Jog / Self-locking / Interlock.
It can control one or more devices in the room, and the performance is stable and reliable.
Easy to use.
Remote control distance: 100 meters in open area.
Specification:
Type: 12V Wireless Remote control switch single controller
Weight: about 57g (controller + remote control)
Size: about 3.9x3.6x2.5cm
Type: Single One-way remote control switch
Working voltage: 12V
Working frequency: 433MHZ
Total load power: 10A
Remote control distance: 100M
Working temperature: -15-75℃
Package list:
1 * Remote Control
1 * Switch
Note:
1. Please allow slight error due to manual measurement.
2. Different monitor colors may be different. Thanks for your kind understanding.
Output Mode:
1. Self-locking: Press the same remote control button, press once, the relay is on, press again, the relay is off.
2. Interlock: Press the "A" button on the remote control, the relay will open, press the "B" button on the remote control, and the relay will be off.
3. Jog: Press the "A" button on the remote control, the relay will open, release the "A" button on the remote control, and the relay will be off. If you keep pressing the "A" button, the remote control is always on. When will it be released then when the relay is off.
Remote Control:
1. Clear code: Press and hold the learning button, the indicator light is on. After about 8 seconds, the indicator light flashes 3 times and then off, indicating that the clearing is successful. The remote controllers that were paired before being erased are all deleted.
2. Working mode selection: The switching mode of this switch is changed by using the jumper cap. The jumper cap is not inserted into the jog mode, inserted in the middle of the T is self-locking, inserted in the L and the middle is interlocked.
3. Learn to match the remote control: Press the learning button, the indicator light is on, then press the remote control button to be matched, the indicator light flashes 3 times and then the corresponding remote control is successfully paired.
If there's multiple remote controls, just repeat step 3 without clearing the code.
Features:
The wireless remote control switch adopts Radio Frequency Identification technology, which is mainly used for remote wireless home appliance control.
Selectable working modes - Jog / Self-locking / Interlock.
It can control one or more devices in the room, and the performance is stable and reliable.
Easy to use.
Remote control distance: 100 meters in open area.
Specification:
Type: 220V One-way Wireless Remote Control Switch Controller
Weight: about 77g (controller + remote control *2)
Size: about 5.5 * 3.3 * 1.8cm
Type: Single remote control switch
Working voltage: AC85-250V
Working frequency: 433.92MHZ
Quiescent current: 8.5mA
Load power: 1100W
Receive sensitivity: -105dBM
Working mode: jog, self-locking, interlock
Output signal: can output one switch signal or one AC220V voltage signal
Coding method: learning code
Modulation method: ASK
Working temperature: -10 - 70℃
Remote control distance: 10-50 meters in open space
Package list:
1 * Wireless Control Switch
2 * Remote Controls
Note:
1. Please allow slight error due to manual measurement.
2. Different monitor colors may be different. Thanks for your kind understanding.
Working Modes:
1. Jog mode: Press the remote control relay to close and release the remote control relay to disconnect.
2. Self-locking mode: Press the remote control relay to pull in, and press the remote control again to disconnect the relay.
3. Interlock mode: Press the remote control A button, the relay pulls in, press the remote control B button to disconnect.
Instructions:
Clear the code (ie clear the remote control learned before): Clear function - press the learning button 8 times in succession. After the LED indicator flashes 5 times and then goes out, the clear function is completed. All remote controls that were paired before being cleared can no longer be controlled.
Pairing remote control: Generally, there are 3 working modes (jog, self-locking, interlocking). The default factory configuration is self-locking. Because each person's requirements are different, if other modes are needed, you can set it at any time.
1. Jog mode: Press the learning button once, the LED indicator flashes once, wait for the LED indicator to light up, press the remote control button that needs to be coded, and the control panel LED indicator flashes 3 times continuously.
After the extinction, the code is successful.
2. Self-locking mode: press the code button twice in succession, the LED indicator flashes 2 times, and after the LED indicator lights up, press the remote control button that needs to be coded, and the control panel LED indicator is continuous.
After flashing 3 times, it goes out and the code is successful.
3. Interlock mode: press the code button three times in succession, the LED indicator flashes 3 times, and after the LED indicator lights up, press the remote control A button that needs to be coded, and the control panel LED indicator is continuous.
After flashing 3 times, it will be on, then press the B button of the remote control of the code as needed. The LED indicator will flash 3 times and then go out. The code is successful. (In order to be compatible with more remote controls, it's needed to learn 2 different buttons in interlock mode).