Wheel Bolt Pattern: | 5x4.5 5x114.3mm |
---|---|
Vehicle Bolt Pattern: | 5x4.5 5x114.3mm |
Thickness: | 15mm per spacer |
Thread Pitch: | M12x1.25 |
Quantity: | 4pcs per set |
Hub/Center Bore: | 66.1mm Hubcentric |
Studs: | 10.9 Grade, stronger than OEM 8.8 Grade |
Material: | 6061 T6 Billet Aerospace Aluminum |
Surface Treatment: | Anodized |
2003-2008 Infiniti FX45
2009-2013 Infiniti FX50
2003-2008 Infiniti G35
2008-2013 Infiniti G37
1996-2001 Infiniti I30
2002-2004 Infiniti I35
1993-1997 Infiniti J30
1990-1992 Infiniti M30
2003-2010 Infiniti M45
1990-2006 Infiniti Q45
1987-1996 Nissan 300ZX
2003-2008 Nissan 350Z
2009-2017 Nissan 370Z
2002-2017 Nissan Altima
1995-2017 Nissan Maxima
2003-2016 Nissan Murano
2008-2016 Nissan Rogue
2000-2011 Nissan Sentra (SE-R & SE-R Spec V ONLY)
2012-2017 Nissan Sentra
1995-1998 Nissan 240SX (Will NOT fit Base Models)
Hub-Centric Chamfered Design.
It's recommended that buyers take the proper measurements to ensure that by adding the spacer,
Be sure to torque the lug nuts to manufacturer specifications
Avoid using an impact wrench; improper usage may cause damage to components
Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
No returns or exchange once installed
Installation should only be performed by a trained professional
If the studs do pass the face of the adapter, you will need to grind/cut them shorter. (This only applies to 1.5" adapters & smaller).
For more details, please read over our installation instructions we put into our package.
4 pcs. Hardware included.
Installation should only be performed by a trained professional.