eBay

Note: we'll ship this item via express mail service to USA, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea,Thailand, Malaysia, Indonesia, Philippine, Singapore.

Clients from other countries pls contact with us in advance to confirm the different shipping charges before you bid.

Feature Overview

DMM is a 6 1/2 digital multimeter with high accuracy, stability and speed. The digital multimeter provides a
maximum measurement speed of 1000 readings/sec. DMM has a 0.0035% DC voltage basic accuracy,
0.01% basic resistance accuracy and other high performance. DMM has broad measurement ranges:

DC voltage from 0.1μV to 1000V
AC (RMS) voltage from 0.1μV to 750V, or about 1000V Peak
DC current from 10nA to 12A
AC (RMS) current from 10nA to 12A
Two and four-wire resistance from 0.1mΩ to 120M.
Frequency from 5Hz to 1MHz

Some additional capabilities of Model DMM:

Full range of functions: In addition to those listed above, The DMM functions include period, dB,
dBm, continuity, diode testing, mX+b and percent.
Programming languages and remote control interfaces: The DMM provides the SCPI
programming language and three remote control interface ports: USB Device, IEEE-488/GPIB
(optional) and RS-232C (optional).
Reading and setup storage: Up to 512 readings and 10 sets of settings can be stored and
retrieved.
Closed-cover calibration: The digital multimeter can be calibrated either from the front panel or
through the remote control interface.

Operating Environment:

Power supply: 110V/220V ±10%
Line frequency: 50Hz / 60Hz ±5%
Power consumption: <20VA
Operating temperature: 0℃ to 40℃
Humidity: ≤ 90%RH

Dimensions and Weight:

Dimensions（W×H×D）：225mm×100mm×355mm
Net weight: Around 5Kg

Accessories:

Test leads x2 (Model TH26036)
Power cord
Two 500mA fuses
Two 1A fuses
PDF Operation Manual
Quality and warranty certificate
Test report
Note: IEEE-488 and RS232C interface is optional

Technical Specifications:

Specifications Assumptions

One year calibration cycle.

Operating temperature at 18 ℃ to 28 ℃

Accuracy is expressed as: ±(% of reading + % of range) after 30 minutes’ warm-up.

Temperature Coefficient: add ± [0.1% × (the applicable accuracy)/ ℃] for 0℃ to 18 ℃ and 28 ℃ to 40℃;

Relative Humidity: Up to 80% for 0 ℃ to 28 ℃ (75% RH for 10MΩ and above ranges of resistance measurement). Up to 70 for 28℃ to 40 ℃.

Displayed Readings and Reading rates

Full Scale displayed reading

Slow Med Fast

119,999,9 119,999 11,999

Reading rates on front panel (Reading/sec, Approximate)

Measurement Function Slow Med Fast

DCV 2 16 57

DCA 2 16 57

ACV 1.5 4 25

ACA 1.5 4 25

2-Wire Ω (Ranges below 100kΩ ) 2 16 57

2-Wire Ω (100kΩ range and above) 2 16 25

4-Wire Ω (Ranges below 100kΩ) 1.5 10 33

4-Wire Ω (100kΩ range and above) 1.5 10 20

Freq 1 10 100

Period 1 10 100

Diode ———— 16 ————

Continuity ———— ———— 57

DC CHARACTERISTICS

CONDITIONS: SLOW or MED with filter of 10

ACCURACY: ±（% of reading + % of range）

● DC Voltage

Rate Range Resolution Input Impedance Accuracy Temp.Coefficient 0℃-18℃;28℃-50℃

100.0000mV 0.1 μV >10G 0.0065+0.0045 (1) 0.0005+0.0005

1.000000 V 1 μV >10G 0.0040+0.0009 (1) 0.0005+0.0001

Slow 10.00000 V 10μV >10G 0.0035+0.0005 0.0005+0.0001

100.0000 V 100μV 10M±1% 0.0045+0.0006 0.0005+0.0001

1000.000 V (2) 1 mV 10M±1% 0.0055+0.0015 0.0005+0.0001

100.000mV 1 μV >10G 0.0065+0.0090 (1) 0.0005+0.0005

1.00000 V 10 μV >10G 0.0040+0.0018 (1) 0.0005+0.0001

10.0000 V 100μV >10G 0.0035+0.0010 0.0005+0.0001

Med

100.000 V 1 mV 10M±1% 0.0045+0.0012 0.0005+0.0001

1000.00 V (2) 10 mV 10M±1% 0.0055+0.0030 0.0005+0.0001

100.00mV 10 μV >10G 0.0200+0.040 (1) 0.0005+0.0005

1.0000 V 100μV >10G 0.0200+0.020 (1) 0.0005+0.0001

Fast 10.000 V 1 mV >10G 0.0200+0.020 0.0005+0.0001

100.00 V 10 mV 10M±1% 0.0200+0.020 0.0005+0.0001

1000.0 V (2) 100mV 10M±1% 0.0200+0.020 0.0005+0.0001

(1) under REL status

(2) 1% over-range (1010V) is readable at 1000V range.

Maximum input voltage: 1000VDC or peak ac for all ranges.

● Resistance (2-Wire and 4-wire)

Rate Range(1) Resolution Test Current Accuracy Temp.Coe.0℃-18℃;28℃-50℃

100.0000Ω 100µΩ 1 mA 0.010+0.004 (2) 0.0006+0.0005

1.000000kΩ 1mΩ 1 mA 0.010+0.001 (2) 0.0006+0.0001

10.00000kΩ 10mΩ 100μA 0.010+0.001 0.0006+0.0001

Slow 100.0000 kΩ 100mΩ 10μA 0.010+0.001 0.0006+0.0001

1.000000MΩ 1 Ω 10μA 0.010+0.001 0.0010+0.0002

10.00000MΩ 10Ω 7.0*Rx/(10M+Rx) 0.040+0.001 0.0030+0.0004

100.0000MΩ 100Ω 7.0*Rx/(10M+Rx) 0.800+0.010 0.1500+0.0002

100.000Ω 1mΩ 1 mA 0.020+0.008 (2) 0.0006+0.0005

1.00000 kΩ 10mΩ 1 mA 0.020+0.002 (2) 0.0006+0.0001

10.0000 kΩ 100mΩ 100μA 0.020+0.002 0.0006+0.0001

Med 100.000 kΩ 1 Ω 10μA 0.020+0.002 0.0006+0.0001

1.00000MΩ 10 Ω 10μA 0.020+0.002 0.0010+0.0002

10.0000MΩ 100Ω 7.0*Rx/(10M+Rx) 0.080+0.002 0.0030+0.0004

100.000MΩ 1 kΩ 7.0*Rx/(10M+Rx) 1.200+0.020 0.1500+0.0002

100.00Ω 10mΩ 1 mA 0.020+0.010 (2) 0.0006+0.0005

1.0000 kΩ 100mΩ 1 mA 0.020+0.010 (2) 0.0006+0.0001

10.000 kΩ 1 Ω 100μA 0.020+0.010 0.0006+0.0001

Fast 100.00 kΩ 10 Ω 10μA 0.020+0.010 0.0006+0.0001

1.0000 MΩ 100Ω 10μA 0.020+0.010 0.0010+0.0002

10.000 MΩ 1 kΩ 7.0*Rx/(10M+Rx) 0.080+0.010 0.0030+0.0004

100.00 MΩ 10 kΩ 7.0*Rx/(10M+Rx) 1.200+0.050 0.1500+0.0002

(1) In order to eliminate the noise interference, which might be induced to the test leads, it is recommended to use a shielded test cable for measuring resistance above 100kΩ.

(2) Using REL function

Maximum Input Protection: 1000VDC or 750VAC for all ranges.

Open circuit voltage: Maximum voltage is 13.3V dc for 100Ω,1kΩ,10Ω,10MΩ and 100MΩ ranges;

Maximum voltage is 7V dc for 100kΩ and 1M ranges.

● DC Current

Rate Range Resolution Burden Volt.(1) & Shunt Resistor Accuracy Temp.Coe.0℃-18℃;28℃-50℃

Slow 10.00000mA 10 nA <0.15V/ 10.1 Ω 0.05+0.004 (2) 0.002+0.0020

100.0000mA 100nA <1.5V / 10.1 Ω 0.05+0.004 (2) 0.002+0.0005

1.000000 A 1 μA <0.3V / 0.1 Ω 0.08+0.004 0.005+0.0010

10.00000 A 10 μA <0.15V / 0.01 Ω 0.25+0.015 0.005+0.0020

Med 10.0000mA 0.1 μA <0.15V/ 10.1 Ω 0.05+0.008 (2) 0.002+0.0020

100.000mA 1 μA <1.5V / 10.1 Ω 0.05+0.008 (2) 0.002+0.0005

1.00000 A 10 μA <0.3V / 0.1 Ω 0.08+0.008 0.005+0.0010

10.0000 A 100 μA <0.15V / 0.01 Ω 0.25+0.008 0.005+0.0020

Fast 10.000mA 1 μA <0.15V/ 10.1 Ω 0.10+0.015 (2) 0.002+0.0020

100.00mA 10 μA <1.5V / 10.1 Ω 0.10+0.015 (2) 0.002+0.0005

1.0000 A 100 μA <0.3V / 0.1 Ω 0.15+0.015 0.005+0.0010

10.000 A 1mA <0.15V / 0.01 Ω 0.25+0.015 0.005+0.0020

(1) Typical voltage across the input terminals at full scale reading.

(2) Use REL function

Maximum Input and Overload Current Protection: 2A/ 250V fuse.

Continuity

Rate Range Resolution Test Current Accuracy Temp.Coe.0℃-18℃;28℃-50℃

Fast 1 kΩ 100mΩ 1mA 0.010+0.020 0.001+0.002

Maximum Input Protection: 1000VDC or 750VAC for all ranges.

Open circuit voltage: <13.3V DC

Test Current: around 1mA DC

Threshold resistance: From 1Ω to 1000Ω, default of power on is 10Ω

Diode
Rate Range Resolution Test Current Accuracy Temp.Coe.0℃-18℃;28℃-50℃

3.0000 V 100μV 1 mA 0.010+0.020 0.001+0.002

Med 10.0000 V 100μV 100μA 0.010+0.020 0.001+0.002

10.0000 V 100μV 10μA 0.010+0.020 0.001+0.002

Maximum Input Protection: 1000VDC or 750VAC for all ranges.

TRUE RMS AC VOLTAGE AND CURRENT CHARACTERISTICS

ACCURACY: ±（% of reading + % of range），23℃±5℃.

● AC Voltage

Rate Range Resolution Accuracy(1 year)(1) 23℃±5℃

10~20 Hz 20~50 Hz 50~100Hz 100~20kHz

100.0000mV 0.1 μV 1.50+0.20 0.50+0.10 0.10+0.03 0.05+0.03

1.000000 V 1 μV 1.50+0.20 0.50+0.10 0.10+0.03 0.05+0.03

Slow 10.00000 V 10 μV 1.50+0.20 0.50+0.10 0.10+0.03 0.05+0.03

100.0000 V 100μV 1.50+0.20 0.50+0.10 0.10+0.03 0.08+0.03

750.000 V (2) 1 mV 1.50+0.20 0.50+0.10 0.10+0.03 0.08+0.03

100.000 mV 1 μV 1.50+0.20 0.50+0.10 0.10+0.03 0.05+0.03

1.00000 V 10 μV 1.50+0.20 0.50+0.10 0.10+0.03 0.05+0.03

Med 10.0000 V 100 μV 1.50+0.20 0.50+0.10 0.10+0.03 0.05+0.03

100.000 V 1 mV 1.50+0.20 0.50+0.10 0.10+0.03 0.08+0.03

750.00 V (2) 10 mV 1.50+0.20 0.50+0.10 0.10+0.03 0.08+0.03

100.00 mV 10 μV 0.20+0.05 0.10+0.05

1.0000 V 100 μV 0.20+0.05 0.10+0.05

Fast 10.000 V 1 mV 0.20+0.05 0.10+0.05

100.00 V 10 mV 0.20+0.05 0.12+0.05

750.0 V (2) 100 mV 0.20+0.05 0.12+0.05

TemperatureCoefficient

0.100+0.004 0.035+0.004 0.005+0.004 0.005+0.004

0℃-18℃ & 28℃-50℃

Rate Range Resolution Accuracy(1 year) (1) 23℃±5℃

20~50 kHz 50~100kHz 100~300kHz

100.0000mV 0.1 μV 0.15+0.05 0.60+0.08 4.00+0.50

1.000000 V 1 μV 0.11+0.05 0.60+0.08 4.00+0.50

Slow 10.00000 V 10 μV 0.11+0.05 0.60+0.08 4.00+0.50

100.0000 V 100μV 0.18+0.05 0.6+0.08 ---------

750.000 V(2) 1 mV --------- --------- ---------

100.000 mV 1 μV 0.15+0.05 0.60+0.08 4.00+0.50

1.00000 V 10 μV 0.11+0.05 0.60+0.08 4.00+0.50

Med 10.0000 V 100 μV 0.11+0.05 0.60+0.08 4.00+0.50

100.000 V 1 mV 0.18+0.05 0.6+0.08 ---------

750.00 V (2) 10 mV --------- --------- ---------

100.00 mV 10 μV 0.25+0.05 0.60+0.08 4.00+0.50

1.0000 V 100 μV 0.25+0.05 0.60+0.08 4.00+0.50

Fast 10.000 V 1 mV 0.25+0.05 0.60+0.08 4.00+0.50

100.00 V 10 mV 0.25+0.05 0.60+0.08 ---------

750.0 V (2) 100 mV --------- --------- ---------

TemperatureCoefficient

0.011+0.005 0.060+0.008 0.20+0.02

0℃-18℃ & 28℃-50℃

(1) Specified accuracy at input >5% of the range.

(2) 1% over-range (757.50 V) is readable at 750V range.

Measurement method: True RMS measurement

Maximum Crest factor: 3.0 at full scale

Maximum input voltage: 750Vrms

≤3×10-7 Volt-Hz for all ranges

Input impedance: 1MΩ±2% in parallel with capacitance <100pF

Maximum DCV: 500V for all AC ranges

● AC Current (True RMS, AC Coupling)

Rate Range Resolution Accuracy(1 year)(1) 23℃±5℃

10~20 Hz 20~50 Hz 50~100Hz

10.00000mA 10 nA 1.50+0.10 0.50+0.03 0.10+0.03

Slow 1.000000 A 1 μA 1.50+0.10 0.05+0.03 0.12+0.03

10.00000 A 10 μA 1.60+0.10 0.60+0.30 0.15+0.03

10.0000mA 100nA 1.00+0.20 0.50+0.05 0.10+0.05

Med 1.00000 A 10 μA 1.00+0.20 0.50+0.05 0.12+0.05

10.0000 A 100 μA 1.00+0.20 0.50+0.05 0.15+0.05

10.000mA 1 μA 0.20+0.05

Fast 1.0000 A 10 μA 0.20+0.05

10.000 A 100 μA 0.20+0.05

TemperatureCoefficient

0.100+0.006 0.05+0.006 0.035+0.006

0℃-18℃ & 28 ℃-50℃

Rate Range Resolution Accuracy(1 year)(1) 23℃±5℃

100~2kHz 2k~5k Hz 5k~10kHz

10.00000mA 10 nA 0.05+0.03 0.10+0.03 0.20+0.03

Slow 1.000000 A 1 μA 0.10+0.04 0.50+0.03 2.00+0.10

10.00000 A 10 μA 0.12+0.04 0.60+0.05 2.50+0.10

10.0000mA 100nA 0.05+0.05 0.50+0.05 0.20+0.05

Med 1.00000 A 10 μA 0.10+0.06 0.50+0.05 2.00+0.20

10.0000 A 100μA 0.12+0.06 0.60+0.10 2.50+0.20

10.000mA 1 μA 0.20+0.10 1.00+0.10 0.50+0.08

Fast 1.0000 A 10μA 0.20+0.10 1.00+0.10 4.00+0.30

10.000 A 100μA 0.20+0.10 1.00+0.10 5.00+0.30

TemperatureCoefficient

0.015+0.006 0.015+0.006 0.100+0.006

0℃-18℃ & 28 ℃-50℃

(1) Specified accuracy at input >5% of the range

True Rms AC Current

Shunt: 10.1Ω at 10mA range,0.1Ω at 1A and 0.01Ω at 3A ranges.

Burden voltage: 10mA Range: <0.15 Vrms

1A Range: <0.3 Vrms

10A Range: < 0.15 Vrms

Measurement method: True RMS measurement

Maximum Crest factor: 3.0 at full scale

Maximum Input and Overload Current Protection: 2A/ 250V fuse.

FREQUENCY AND PERIOD CHARACTERISTICS

CONDITIONS: SLOW RATE (GATE TIME 1 Sec)

ACCURACY: ±( % of reading)

● Frequency

ACV Frequency Full Scale Input Sensitivity

Resolution Accuracy(2)

Range Range Reading (Sine Wave)

5-10 Hz 1μHz 9.999,999 0.05 200mVrms

100mV

10-100Hz 10μHz 99.999,99 0.01 40mVrms

100-100 kHz 10mHz 999.999,9 0.005 40mVrms

750V

100k-1MHz(1) 100mHz 999.999,9 0.005 100mVrms

● Period

ACV Frequency Full Scale Input Sensitivity

Resolution Accuracy(2)

Range Range Reading (Sine Wave)

1~10μs (1) 0.001ns 9.999,999 0.005 100mVrms

100mV

10μs~10ms 0.1ns 9.999,999 0.005 40mVrms

10ms~100ms 0.1μs 99.999,99 0.01 40mVrms

750V

100ms~200ms 1μs 199.999,9 0.05 200mVrms

Maximum Crest factor: 3.0 at full scale

Maximum input voltage: 750Vrms

≤3×107 Volt-Hz for all ranges

Input impedance: 1MΩ±2% in parallel with capacitance <100pF

Maximum DCV: 500V for all AC ranges

Measure Characteristics

Gate Time: 10ms,100ms,or 1 sec。

(1) If tested frequency is greater than 1MHz, it will be displayed but no specified accuracy is guaranteed

(2) Specified accuracy at input >5% of range.

Measuring rate

Maximum rate under internal trigger mode: 1000 meas/sec

Maximum rate under external trigger mode: 1000 meas/sec(measurement results are stored in the

internal memory)

Triggering and Memory

Reading hold sensitivity: 0.01%, 0.1%, 1% or 10% of reading

Trigger Delay: 0 to 6000ms (1 ms step size)

Memory: 512 readings can be stored

Math Functions

Rel, Max/Min/Average/StdDev (of stored reading), dBm, dB, Limit Test, % and mX+b

dBm Reference Resistance: 1Ω to 9999Ω (1Ω step size), default is 75Ω

Standard Programming Languages

SCPI （Standard Commands for Programmable Instruments ）

Remote Interface:

Optional GPIB(IEEE-488.2) and RS-232C

General Specifications:

Power Supply: 110/220V±10%

Power Line Frequency: 50/60Hz ±5%

Power Consumption: ≤ 20VA

Operating Environment: 0℃ to 40 ℃, ≤90%RH，

Storage Environment: -40℃ to 70 ℃

Warm-up: more than 30mins

Dimensions (W×H×D): 225mm×100mm×355mm

Net Weight: Around 2.5Kg