1 Quart of Enhancing Stone Sealer #6 

 

Stone Sealer #6 is a more environmentally friendly version of Stone Sealer #5 The sealer is water based with no solvents or VOC and is non-toxic and nonflammable. It contains a reactive silicone polymer in a water emulsion. It impregnates marble, granite, travertine, slate and limestone to form a “wet look” protective barrier. This is a combination sealer that offers both the qualities of Stone Sealer #2 and an enhancer in a single bottle. We recommend this sealer for sale to both the general public and the stone fabricating industry.

Stone Sealer #6 will cover approximately 500 square feet per gallon for each application. We recommend applying two coats approximately 2 hours apart rather than one thick coat. Do not over apply the sealer and remove any excess from the surface within 5 minutes using a clean dry white cloth. The natural stone surface should be kept completely dry while the sealer is curing for 24 hours. Apply with either with a micro fiber cloth on small areas such as counter tops. However, for larger floor or wall areas apply or with a very short nap (1/8″) roller. We recommend that a single top up application is re-applied on top of the old sealer every 2 to 3 years.

 S&H is FREE in USA(50)  

Please contact technical support if you have any questions

We offer a 100% guarantee that anything you buy from us will be exactly as described that you will be 100% satisfied or you can send it back for a 100% refund.

 

THANK YOU FOR VISITING OUR AUCTIONS!!!