Description:
1. It includes a Timer and a Receiver, can work as a timer and remote shutter release
2. Multiply timer functions: delay timer, long exposure timer, interval timer, setting for the number of exposure and BKLN function (Bracketed Long Exposure)
3. For shutter release mode: Single shooting ,continuous shooting, bulb exposure and 2 second delay modes are available for shutter control
4. The timing setting can be accurate to 0.1 seconds. 2.4GHz wireless transmission, distance up to 60M. Supports BKLN Function: Bracketed Long Exposure function allows a group of photos to be taken at automatically exponentially changing exposure times, useful for low-light multiple exposure HDR images
Specification:
1. Transmission distance: 2.4GHz 60m+ (open space without interference)
2. Maximum number of shoots: 1-199 photos programmable and - - being unlimited photos.
3. Batteries:
2 x AA batteries (for Transmitter)
2 x AA batteries (for Receiver)
Do not included in Package
4. Weight: Transmitter 56.5g; receiver 37.5g
5. Dimension:
Transmitter - L 130.4mm X W 46.2mm X H 22mm;
receiver - L 85mm X W 37.4mm X H 30.9mm
6. Cable length: Not stretched 19.5 inches(50 cm); stretches to approximately max 59 inches (150 cm)
Compatible with:
>> Nikon Z8, Z9, D6, D5, D4s, D4, D3x, D3s, D3, D2Xs, D2X, D2Hs, D2H, D2, D1X, D1H, D1, D850, D810, D800, D800e, D700, D500, D300s, D300, D200
Z5, Z7 II, Z7, Z6 II, Z6, D780, D7500, D750,D7200, D7100, D7000, D610, D600, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D90, Df, Coolpix A, P950, P1000, P7800, P7700,
>> Fuji: S3 and S5.
>> Kodak: DCS-14N
FQAWhen you press the shutter button on Transmitter, the Receiver's light doesn't change to red and do not respond to Transmitter, that means it hasn't received the signal from the Transmitter. Please follow the below steps to set the Smart Code:1. Turn on the transmitter and receiver. 2. Use a needle-like object to press into the code setting button on receiver, which will cause the LED on receiver to flash red and green light alternately for 25s. Press the shutter button on transmitter to reset the code during the code setting mode. When the code is successfully set, the LED on receiver will get back to normal mode, flashing green light. Normally, the frequency of transmitter and receiver will be pre-set in production. You can use the timer instantly.