SPECIFICATIONS
- Condition: 100% new
- Color: As pictures show
- Material: Plastic
- Frequency range: 170-862 MHz
- Measurement accuracy: -40 ~ -10 dBm
- Input level range: 65-95 dBuv
- Power supply: 9V DC or Battery pack 6x AA batteries (not included)
- Size: approx.10x6.5x3.3cm( 3.94x2.56x1.30 inch)(LxWxH)
- Item included:
1 x TV signal finder
1 x battery box
1 x connection line
1 x user manual
- Suitable for: RV over-the-air TV antenna
-
Only the above package content, other products are not included.
- Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
3) If your antenna has an internal amplifier, (eg: 01MM-SQ01), it should be powered by an external power supply via a DC power inserter. Make sure the power inserter is positioned between the finder and the antenna.
DESCRIPTION
Product Dimension:
Feature:
1) 100% new with good quality.
2) Connects in-line with your antenna.
3) Numbers feedback displays signal strength intuitively.
4) Variable sensitivity adjustment to work with TV towers both near and far.
5) Leaning Tech DVB-T 95DT TV Antenna Signal Finder Meter with pointer more convenient to locate the satellite signal.
Operation:
1) Connect the antenna cable to the left F Female and the battery pack cable to the right F Female. Remove any external amplifier that may be connected to the antenna.
2) Adjust the antenna to the best position by watching the meter's reading. Higher up the scale gives a better signal. If the finder's reading becomes full scale, adjust the level control knob to reduce the reading to around 5 (Turning the knob clockwise will decrease the reading), continue to move the antenna until you have the highest possible meter reading.
3) Remove the finder and replace any amplifier that was disconnected.
