MC-FXO-2-SC20A (Transmitter) is 2CH POTS Over Fiber Converter for both SM 20Km and MM 2Km, SC + one Ethernet Port.

MC-FXO-2-SC20A and MC-FXS-2-SC20B (Receiver) are 2 channel POTS (Plain Old Telephone System) over fiber converter / extender. This Voice over Fiber converter uses RJ-11C modular connectors for each copper pair connection. A pair of MC-FXO-2-SC20A and MC-FXS-2-SC20B is required to implement a point to point application. FXO type unit acts as a transmitter and connects to a telephone line (PSTN) or PBX station line and has ability to detect ring voltages and to act as a telephone. FXS type unit acts as a receiver and connects to a telephone set.

MC-FXO-2-SC20A and MC-FXS-2-SC20B are standalone units with AC to DC5V 1A adapters and use WDM or bi-directional optical transceivers, Type A: 1310nmTx/1550nmRx and Type B: 1550nmTx/1310nmRx, using one single-mode fiber for 20Km or using one multi-mode fiber for up to 2Km and SC connector. So they need to be used in pair.

MC-FXO/FXS-2 series converters use advanced digital multiplexing communication solutions for clear voice and high stability. Users do not need to do any settings or adjustment. They are designed for Plug and Play features. Other transmission distance (40Km, 60Km, 80Km and 100Km) converters are available at customers’ special request. Fast Ethernet Port is for your IP camera or Ethernet access. Please use support @ megatelindustries . com for customer service and tech support.

Note: MC-FXO-2-SC20A and MC-FXS-2-SC20B need to be used as a pair.

Features


·        All-digital uncompressedtransmission

·        Extend telephone voice transmissionup to 100Km over one single-mode fiber, surge protection

·        Industrialgrade design -40°C ~ +80°C

·        SupportFXO/FXS POTS phones, 2/4W audio frequency, magnet phones, etc.

·        PCM PulseCode Modulation

·        Supportcaller ID/Fax and hot swap


Specifications

Optical Interface:   Connector SC                                                       Electrical Interface:  Connector RJ-11

                     Fiber    MM 62.2/125um, SM 9/125um                                FXO Mode   Impedance: 600 Ohms

                                 Rate 155Mbps                                                                                Ring Voltage: 35V –150V

                Distance   MM 2Km and SM 20Km                                                                 Insertion Loss: -3 ±0.75dB

           Wavelength   MM 850 & 1310nm, SM 1310 & 1550nm                                      Ring Frequency: 17~60Hz

        WDM A Type   1310Tx/1550Rx                                                                              Return Loss: 20dB

        WDM B Type   1550Tx/1310Rx                                                          FXS Mode   Impedance: 600 Ohms

Indicators:               LED (Power and Fiber Link)                                                          Ring Voltage Peak: 110V- 150V

Power Input:           AC90-260V to 5VDC 1A                                                                 Insertion Loss: -3 ±0.75dB

Power Consumption:  < 10W                                                                                         Ring Frequency: 22 - 28Hz

Dimensions:           97 x 110 x 25mm (W x D x H)                                                      Return Loss: 20dB

Weight:                    450g                                                                        E/M Control:    Support all E/M signal control methods

Operating Temperature:    -40°C ~ +80°C                                        FrequencyCharacteristics: 300 ~ 3400Hz (-0.6 ~+3dB)

Humidity:                 0 ~ 95% (non-condensing)                                 CrosstalkAttenuation:         > 65dB

Certification:           CE, FCC, RoHS compliant                                 MTBF:                                     100,000 Hours