PLEASE READ THIS CAREFULLY BERFORE YOU ORDER THE KIT: |
1. Please make sure that the LCD screen/panel can still work normally. You can install the screen/panel on the original notebook or monitor for testing. If it fails to display normally, the screen/panel has been damaged. Please do not place orders to avoid unnecessary disputes. 2. We will install the firmware program for free according to the LCD screen/panel model you ordered. So make sure the screen model you ordered is the same as your actual screen model. Otherwise the controller board may be incompatible. 3. If your LCD screen/panel model is not in our sales list, please leave a message with us via eBay. Or send us a photo of the screen model label to help confirm. (The model label can be found on the back of the screen) 4. If you concern much about resolution setting, please reconsider before bidding! DIY need certain professional knowledge. If you have any questions during the operation, please contact us for guidance. 5. Because we need to choose the right kit for your LCD screen/panel, and the supplier may upgrade or update the product, some accessories may differ from the picture. Please refer to the actual product received. Hope you can understand. Controller Board Features: This kit work for 1366*768 resolution EDP 30-Pin signal port 60Hz screen/panel Input Power Adapter: DC12V-3A (DC port: 2.5MM and 5.5MM inner+ outside-) Come In Standby Mode When Not Input Signal (Standby Mode <0.3W) Video Input: HDMI VGA Audio Input: HDMI Audio Output: Small speaker (optional) OSD: Brightness Contrast VOL+ VOL- Language And So On Language: English French German Spanish Italian And So On Board Size: 107mm*55mm*16mm
The kit includes the following accessories: 1X EDP Controller board 1X EDP signal cable 1X Keypad with cable Note: In addition to this kit. You also need to prepare the Power Adapter and HDMI or VGA cable yourself. If you need DC 12V 3A power supply, please click here to buy it. If you need this controller board protective shell, please click here to buy it. The controller board is compatible with the following screen models. If your screen model is not in the list or can’t confirm whether it’s compatible, please contact us for help.
Controller board kit installation steps: 1. Take away the old screen cable from the LCD panel. 2. Connect the new screen cable to your LCD panel. (Note the connector contact direction) 3. Connect the controller board to the PC with HDMI or VGA signal cable. 4. Input power DC 12V 3A. (Please use the standard LCD screen power supply, other power input may not boot normally) 5. After all finishing the connecting, please do not rush to power on! No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board. Please refer to the figure below to connect the screen cable correctly.
Modify Language: 1. Use the Keyboard "MENU" button to enter the setup menu. 2. Press the “UP”/“DOWN” button to select the fourth item “OSD”. Then press the “ENTER” button to confirm the selection. 3. Press the “ENTER” button in the first “Language Selection” to confirm the selection. Then press the “UP”/“DOWN” button to select language that you need. Press the “ENTER” button again to confirm and exit. Please refer to the photos below.
|
✍Payment |
|
✍Shipping |
|
✍Feedback |
|
END Thanks! |