Rustins Quick Dry Clear Varnish Choose Satin, Gloss or Matt Finish - All Sizes
Rustins Quick Dry Varnish is a hard wearing coating for all interior woodwork, has the least effect on the colour of the wood. A tough and durable finish for all woodwork and cork. Apply 2-3 coats for the perfect finish. Low odour non-toxic and touch dry in 20 minutes, re-coatable in 2 hours. The varnish looks milky-white whilst liquid but dries to a hard, durable transparent finish, resistant to water and alcohol. Low odour, quick-drying, non-yellowing on ageing.
Available Finishes: Gloss, Matt And Satin
Sizes Available: 100ml*,250ml, 500ml, 1 Litre, 2,5 Litre and 5 Litre
*The 100ml size is filled by us from a larger tin and is recommended for touching up previously varnished areas, very small jobs or as a sample if you want to try it before buying a larger size.
Coverage: 12-15m² per Litre per Coat depending on the absorbency of the surface
Usage Instructions:
Preparation: Surfaces must be clean and previous coatings should be removed. It is advisable to clean old surfaces with White Spirit to remove any wax or contamination, wipe away the solution formed with clean kitchen paper towels. Bare wood may be dyed with either Rustin’s Wood Dye before varnishing
Application: Synthetic brush, Varnish Roller or Spray (can be diluted with water about 10% if necessary for spraying, or if the temperature is high).
Compatibility: Can be applied over either Rustin’s Wood Dye, other brands may be incompatible. Bare wood may be bleached with Rustin’s Wood Bleach prior to varnishing. Not for use over scumbles or oil-based paints. Other types of coatings/stains may be incompatible, including acrylic paints and vinyl emulsion. If using anything other than Rustin’s Wood Dye, a test area should be coated to determine compatibility.
Maintenance: The varnish will take 3 days to fully harden. Spills should be wiped-up immediately during this time to prevent damage. The surface can be cleaned as required with a mild detergent solution, do not use aggressive cleaning products. Re-coat the varnish as necessary, after cleaning and lightly sanding the surface.
Clean-Up: With water whilst wet. If dried-on, clean equipment and brushes with either Rustin’s Brush Restorer or Rustin’s Strypit Paint & Varnish Remover