The Vacuum mixer is used for mixing and vibrating investment materials and molded materials. As the mixing process is done in a vacuum state, the workpiece is free of bubbles, and firmness and compactness of the mold has also been improved.

Instruction

1. Unpack the package, then check if all the accessories are inside.
2. Plug in the machine.
3. Connect the machine to an air compressor.
4. Stir the material inside the vacuum bowl to pasty state.
5. Screw up the air outlet bolt. Switch on the machine and preset the Mixing time. Press the Vacuum Pump button. Connect the vacuum bowl closely with the machine and then press Mixing.
6. After finishing the mixing, switch off the machine.

Cautions
1. Read all the operation steps before use to avoid damage.
2. The air pressure of the air compressor must be above 0.6mpa.
3. Do not disassemble the machine without professional instruction.
4. Please check the grounding of the machine regularly. Make sure there is a safe connection between the case of machine and the ground.
5. Make sure the investment is less than one half of the vacuum bowl in case there is blocking of the air circuit.