Specifications:
Model: 3.5" to 5.25"
Material: Metal Bracket+Rubber Nails
Size: 145x123x30mm
Features:
Hard Disk
Protection : When the desktop computer hard disk is running, the platter
rotates at a high speed of 7200 rpm/min, which realizes data reading
and writing storage. When installed on the chassis, it will generate
jitter, resonance and noise. In the long run, it will cause the hard
disk damage. Therefore, it is imperative to eliminate resonance and
noise, in order to protect the hard disk from the hard disk shock
absorption and noise reduction bracket.
Active
shock absorbing silica gel: Active organic silica gel is a special
material with high strength and toughness. It has stable material
properties and good shock absorption and noise reduction effect. This
product uses active flexible silicone as a pillar, which is superior in
vibration absorption and environmentally friendly.
Fan
installation position: A fan installation position is reserved on the
hard disk damping bracket ,can be install an 8CM cooling fan .This can
make hard disk heat dissipation and cool well , ensure the stable
operation of the hard disk.
Suitable for most chassis with optical drive, and one bracket occupies one optical drive. Fits in any 5.25 inch front bay.
Installation steps:
1. Install the two barrier strips with a screwdriver on both sides of the hard disk.
2. The installed barrier strip stuck in the shock absorbing silicone, and the two sides must be stuck.
3. Install the installed hard disk in the chassis drive position.
Package List:
1x Hard Disk Shock Absorber Bracket
6x Rubber Nail
2x Fixed Metal Strip
8x Mounting Screws