This Chloride Check is one of the most advanced chloride test strip available today.

• Simple Dip-Wait-Read Testing Method
• Designed to verify EPA* guidelines for chloride
• Test strips are stored in a plastic container to protect them
• Ideal for quick and reliable testing of water
• Easy and safe-to-use
• Measuring levels from 0-500 ppm (mg/l)
• Accurate results are achieved in under one minute
• This product is safe and easy to use since there are no chemicals to mix, an MSDS is not required

(*EPA = US Environmental Protection Agency)

This test is ideal to check the level of salt in water when a water softener is used then as it measures the level of sodium chloride (salt) in water.

Suitable for: fresh water samples, including water from taps, wells, springs, boreholes, ponds as well as rain water

Contains: 50 test strips, detailed instructions, colourchart

Sensitivity: 0, 50, 100, 250, 500 ppm (mg/l)

Total Test time: 40 seconds

How to Use:

1. Collect water sample in a 200 - 250ml container
2. Dip one test strip into water sample for 10 seconds with constant, gentle back and forth motion
3. Remove strip and shake once briskly to remove excess sample
4. Wait 30 seconds and match with closest colour on colour chart

Please note: that this is a screening test and can not be used to certify water as safe or unsafe for drinking. This test kit provides approximate results ONLY when used in strict accordance with instructions. SimplexHealth expressly disclaims any liability resulting from the use of this product, failure to follow instructions, or reliance of test results. This is not a measuring instrument. Store in a cool, dry (15-27°C) place and away from excess heat and direct sunlight. Wash hands before and after use. Dispose of used tests responsibly. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids.

Made in USA