- The AFP 6 FT Single Leg Internal Shock Absorbing Lanyard is made with a light-weight, heavy-duty, high-strength outer polyester webbing and a polyester core specially sewn in to reduce impact forces, with two substantially secure heavy duty double-locking gates.
- The tough webbing is highly resistant to abrasion, mildew, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high temperature threshold.
- Our most popular 2-in-1 fall arrest single lanyard that minimizes trip hazards or fall with a shock absorber is built into the lanyard, eliminating the need for an additional bulky shock pack. Elasticated leg expands from 4-1/2 to 6 feet and can resist 8,500 lbs. of tensile strength!
- Meets all applicable standards ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, including the stringent ANSI Z359.1.
- AFP products are proudly designed & shipped from Miami, FL, USA. Our Miami-based team will quickly answer any and all of your questions and concerns about your order in English or Spanish, “Se habla Espanol.” AFP products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution.
SPECIFICATIONS
***Weight: 3.4 lbs.
***Standard Length: 4-1/2 ft.
***Extended Length: 6 ft.
***Weight: 3.4 lbs.
***Standard Length: 4-1/2 ft.
***Extended Length: 6 ft.
***Max Freefall: 6 feet
***Connectors: (1) Rebar and (1) Snap Hook
***Worker Capacity Range: 130-310 lbs.
***Strength: Min. 8,500 lbs. tensile strength
***Average Arrest Force: Less than 900 lbs.
***Connectors Material: Forged Heat-Treated Alloy Steel; Min. 5,000 lbs. tensile strength
***Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and sideload
***Applicable Standards: ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910.
The AFP Single-Leg Internal Shock Absorbing Lanyard is comprised of heavy-duty webbing, designed to diminish the risks of falling or slipping. The tough webbing is highly resistant to abrasion, mildew, aging, and won’t soften from frequent use. This webbing has low shrink properties and a high-temperature threshold. Constructed to scale down the impact forces resulting from fall, this Shock Absorbing Lanyard assists workers in effectively moving and position themselves on the job site. The shock absorber is built within the lanyard, making this a lightweight 2-in-1 feature that eliminates the need for a bulky shock pack. This shock-absorbing lanyard does not extend pass 6 FT unless impacted by the force of fall and must be used in conjunction with a full-body harness. Built tough, to limit fall forces up to 900 lbs. or less. Forged steel connectors are corrosion resistant and have a 3,600 lb. gate strength. The lanyard and its double-locking connectors are all ANZI compliant and are easy-to-use. Meets OSHA and ANSI standards, including the stringent ANSI Z359.1.
