Flowfit Hydraulic BSP ISO A QUICK RELEASE MALE COUPLING
Flowfit Hydraulic Quick Release Couplings
Flowfit Hydraulic ISO A Quick Release Couplings Male & Female Ends
Flowfit hydraulic ISO A quick release couplings are used in a wide range of hydraulic applications including construction equipment, manufacturing machinery and on plant systems. They can be found where fluid transfer lines need to be connected and disconnected for operation or maintenance of equipment.
Flowfit Hydraulic ISO A quick release couplings interchange with:
- Parker6600
- Safeway S56
- Tomco A5600
- DNP PAV
- Perfecting K
- Snap Title 61
- Aeroquip FD56
- Stucchi BIR
Please refer to the specification table below to ensure the correct size is selected.
Red plastic plugs and caps for female/male couplings up to 1" BSP and aluminium plugs and caps for female/male couplings from 1 1/4" to 2" BSP are available to protect and stop dirt entering the quick releases and your hydraulic circuit.
Table headings relate to product diagram/drawing shown with the product images, i.e. L1 in the table relates to the L1 line in the diagram/drawing.
DN | ISO | L1 | L2 | L3 | OD | S1 | S2 | T | Product Reference (Female) | Product Reference (Male) |
04 | 6.3 | 70.0 | 49.0 | 35.0 | 26.2 | 19.0 | 19.0 | 1/4" BSP | QRCISOAF14 | QRCISOAM14 |
06 | 10 | 85.0 | 60.5 | 42.5 | 31.0 | 22.0 | 22.0 | 3/8" BSP | QRCISOAF38 | QRCISOAM38 |
08 | 12.5 | 94.0 | 68.5 | 46.5 | 38.0 | 27.0 | 27.0 | 1/2" BSP | QRCISOAF12 | QRCISOAM12 |
12 | 20 | 115.0 | 85.0 | 57.5 | 46.0 | 34.0 | 34.0 | 3/4" BSP | QRCISOAF34 | QRCISOAM34 |
16 | 25 | 131.5 | 99.5 | 65.5 | 52.0 | 41.0 | 41.0 | 1" BSP | QRCISOAF1 | QRCISOAM1 |
20 | 31.5 | 148.0 | 116.0 | 74.0 | 70.0 | 50.0 | 50.0 | 1-1/4" BSP | QRCISOAF114 | QRCISOAM114 |
24 | 40 | 168.0 | 136.5 | 85.0 | 83.0 | 60.0 | 60.0 | 1-1/2" BSP | QRCISOAF112 | QRCISOAM112 |
32 | 50 | 200.7 | 160.0 | 100.0 | 99.0 | 75.0 | 75.0 | 2" BSP | QRCISOAF2 | QRCISOAM2 |
Nominal Size | Max. Working Pressure | Max Flow | Rated Flow | Min Burst Pressure | Fluid Spillage |
Male | Female | Coupled |
DN | ISO | (BAR) | (L/MIN) | (L/MIN) | (BAR) | (BAR) | (BAR) | (CC) |
04 | 6.3 | 315 | 12 | 12 | 1510 | 1760 | 1450 | 0.5 |
06 | 10 | 315 | 46 | 23 | 1470 | 1520 | 1590 | 1.9 |
08 | 12.5 | 250 | 90 | 45 | 1000 | 1460 | 1240 | 2.7 |
12 | 20 | 250 | 148 | 106 | 900 | 1530 | 1040 | 9.3 |
16 | 25 | 200 | 200 | 189 | 1300 | 960 | 1300 | 16 |
20 | 31.5 | 200 | 378 | 288 | 1140 | 850 | 1090 | 30 |
24 | 40 | 160 | 750 | 379 | 810 | 790 | 820 | 54 |
32 | 50 | 100 | 1000 | 757 | 650 | 960 | 1100 | 120 |
Instructions for use:
Prior to connecting ensure that the mating parts of the couplings are clean and free of dirt to avoid to avoid contamination of the hydraulic system.
To connect, pull the collar on the female coupling back and insert the male coupling as far as it will go. Release the collar to lock the couplings together.
To disconnect, pull the collar on the female coupling back and allow the male coupling to disengage.
Caution:
Under no circumstance should the couplings be connected or disconnected with pressure in the hydraulic system.
Whilst in use, the couplings may become hot (up to +100°C). Protective gloves should be worn when disconnecting.
To reduce the risk of contamination, the use of protective plugs and caps on the couplings when they are disconnected is strongly recommended (available separately)
Specification:
- Materials: zinc-plated carbon steel body
- Valve: Poppet Type
- Back-up ring: in pure Teflon
- Seals: standard in nitrile NBR.
- Available on request: FKM, EPDM and VMQ seals
- Working Temperature: with standard seals (-25°C + 125°C)