Mediasonic HFR2-SU3S2 PRORAID 4 Bay 3.5" SATA Hard Drive Enclosure - USB 3.0 & eSATA
Mediasonic HFR2-SU3S2 PRORAID Box is a 4 Bay hard disk drive enclosure for 3.5" SATA I / II / III hard disk drive. The main feature is its Hardware Embedded Raid Function that supports Single Mode, JBOD, and Raid 0 / 1 / 3 / 5 / 10
Feature and Spec
Support 3.5" SATA I / II / III hard disk drive up to 16TB per drive, and up to 4 x 16TB
Support 2.5" SATA SSD / Hard Drive up to 10TB. (Bracket Adapter required, sold separately)
Support hard drive transfer rate up to SATA III
Hardware Raid controller built-in on board
Compatible with Mac USB 3
Transfer Rate up to 5.0Gbps via USB 3.0
Transfer Rate up to 3.0Gbps via eSATA
One Button for RAID Control
Smart Fan Function
Thermal-Sensor Built-In
Auto & Manual Mode
3 level of speed
Raid Mode Support
Single Mode (Your computer will recognize 4 different drives)
Raid 0 (Spanning) JBOD
Raid 0 (Stripping)
Raid 1 (Mirroring)
Raid 3 (Stripped set with dedicated parity)
Raid 5 (Stripped set with distributed parity)
Raid 10 (Mirroring + Stripping)
Package Content
HFR2-SU3S2 Enclosure
eSATA Cable
USB 3.0 Cable
Power Adapter (Universal)
Power Cord (US Type)
User Manual
Screw Driver
HDD Handle x 4
Important Note
Raid Mode is not preset to any mode. Please set up your desired Raid Mode, or the enclosure will turn off after few seconds after it turned on.
If this unit is connected to eSATA port, please make sure your computer eSATA port support Port-Multiplier.
Mediasonic strongly recommend user to install same capacity / model / brand of hard drive when you are setting Raid Mode. (Except Single Mode).
User can download user manual and QIG from official website.
Shipping: Expedited Shipping (Arrive to you in 1 to 3 business days)