Product Information

78mm Recess Wheels

 



 
  • R10 profile to suit the entire range of APC Galvanized profile tracks

  • Dual bearing system for the capacity of 250KG per wheel (500kg per pair)

  • Fits into 75mm height tubing wit a cut out size to fit the wheel of 80x35mm

  • Raises the gate by 40mm when installed with the floor track

  • Easy installation with pre-punched fixings, just drops into place after cut out and screws to the tubing from the flanged sides


    •  

 

60mm Nylon Roller and Bracket Set





  • 165mm Long Galvanized steel construction for long life outdoor use

  • 60mm Nylon rollers with completly adjustable positions

  • 75mm internal clearance between rollers at full span, allowing for 25mm ajustment for the gate a gate thickness not exceeding 50mm is ideal (see 200mm long bracket to allow 85mm gate thickness)

  • Pre-punched fixing holes ideal for adjustments prior to final fixing

 


55mm U Guide


3m Complete Standard Sliding Gate Hardware Kit

  • Galvanized steel construction for long life outdoor use

  • Flared entry to guide gate into the reciever in case of wind loads pushing the gate

  • 55mm internal clearance ideal for standard steel or aluminum gates without cladding

  • Pre-punched fixing holes ideal for adjustments prior to final fixing


Anodized Gate Stop

 



 
  • Anodized steel construction for long life outdoor use

  • 115mm Height

  • 40mm Rubber bumper

  • Solid 100x80mm base

  • Pre-punched 10mm fixing holes


    •  

 

Bolt Down Galvanized Floor Track

 



 
  • R10 profile to suit the entire range of APC recess and flat mount wheels

  • Rounded profile provides the least resistance for sliding gate movment over the alternative "V groove"

  • High strength 3mm steel, Galvanized for complete long life outdoor use

  • Pre-punched fixing holes ready for anchor nails

  • Easy to install, bolts down to concrete! No need to set in during concreting


    •