Excellent Condition/ Professionally Owned and well cared for with some minor signs of use.
a usb charging cable, a bag, a level, and manual not pictured.
https://alpinelaboratories.com/pages/radian-1-support-get-started_s
Compatibility: Camera control via shutter cable. Compatible with any camera that has a wired, remote shutter port. See here for a compatibility list.
Dimensions: 4.57 x 1.77″ (116mm x 45mm)
Weight: 15 oz (425g)
Thread Size: Standard 1/4-20 thread is used in the top and bottom of Radian
Panning Load: 15lbs (7kg)
Tilt load: 4+ lbs
Tested with the following setup: Canon 5D Mark III, Canon EF 16-35mm f/2.8 LII, and Heavy Duty L-bracket
Table Top load: Tested
with Canon Rebel with 18-55 kit lens (Note: a heavy off-axis moment,
caused by a large lens, will not allow Radian to balance on a table top
unless an off-axis mount is used to shift the camera back)
Angular Resolution: 0.0173°
Over
20,000 discrete positions per 360°. This allows for a shot every 3
seconds for a full revolution over 24hrs with actual movement between
each shot
Power Source: Internal Li-ion rechargeable battery gets 100+ hours in pan mode
Expandable battery life via external USB power packs through USB charging port
Max timelapse speed: 1 degree/second
Max continuous drive speed: 4.3 degrees/second
Ports: USB
Micro (for charging, firmware), 2.5mm (trigger port to camera), 3.5mm
audio (uploading settings from Radian App), 2 LED ports (battery,
shutter indicator; below).
Indicators: Red/Green LED for battery/charging, Red/Green LED - on/off, shooting.
With
- Canon E3 Cable :
60D, 70D, All 'Rebels' (100D, 300D, 350D, 400D, 450D, 500D, 550D, 600D,
650D, 700D, 1000D, 1100D, etc), T5i, T4i, T3i, T3, T2i,T1i, TXi, XTi,
SL1, Kiss, SX50, G10, G11, G12, G15, G16, G1X
****If you have any of these Cameras you will need to purchase:
- Canon N3 Cable :
10D, 20D,30D, 40D, 50D, 7D, 6D, 1Dx, 1D Mark II, 1Ds Mark II, 1D Mark
III, 1Ds Mark III, 1D Mark IV, 5D, 5D Mark II & 5D Mark III
- Not Supported : SX30, EOS M
Nikon
- Nikon DC2 Cable : Df, D90, D600, D610, D750, D3100, D3200,D3300, D5000, D5100, D5200, D5300, D7000 and D7100, CoolPix P7800
- Nikon DC1 Cable : D70S,D80
- Nikon DC0 Cable :
F90x, F90, F100, F6, F5 D4, D3, D3x, D3s, D2, D2H, D2Hs, D2X, D2Xs, D1,
D1H, D1X, D200, D300, D300x, D300s, D700, D800, D800E & D810
- Not Supported : COOLPIX P5100, Coolpix L310, D3000, D40, D50, D60, D70
Pentax
- Canon E3 Cable: K3, K5, K7, K30, K500, K50, *istD, *istDL, *istDs, *ist, *istDL2, *K100D, K110D, K10D, K200, K20D, K5 II, K5 IIs
- Not Supported : GF3, K-x
Samsung
- Canon E3 Cable : GX, 1L, GX 1S, GX-10, GX-20, NX10 & NX100
Contax
- Canon E3 Cable : 645, N1, NX, N Digital
FujiFilm
Hasselblad
- Canon E3 Cable : H Series
Sigma
- Canon E3 Cable : SD1, SD9, SD10, SD14 & SD15
Kodak
Panasonic
- Panasonic RS1 Cable:
DMC-FZ50 SERIES, DMC-FZ30, DMC-FZ100, DMC-FZ1000, DMC-FZ30, DMC-FZ20,
DMC-FZ200, DMC-G1, DMC-GX1, DMC-G2, DMC-G3, DMC-G5, DMC-G10, DMC-GF1,
DMC-GH1, DMC-GH2, DMC-GH3, DMC-GH4, DMC- L1 & DMC-L10
SERIES,LC-1,L-1, Lumix GX7
- Not Supported : DMC-FZ35
Sony
Please
note that the Sony Hotshoe Mount is not physically compatible with
Michron. You can still use your Michron with Sony cameras, but Michron
will not be able to sit securely in the hotshoe during operation.
- Sony S1 Cable :
A700, A900, A350, A300, A200, A100, A100k, A33, A35, A37, A55, A57,
A65, A77, A580, A560, A550, A500, A850, A700, A100,, A99, A900 Alpha S1
- Sony S2 Cable : A5000, A5100, A6000, A77ii, A7, A7R, A7S, HX50V, NEX 3N, A58, RX100 II, RX100 III, HX300 and 5000L, A7ii, A7Sii, A7Rii
- Not Supported : Nex Series (Nex 3, 5, 7,etc), A230, RX1
Konica Minolta
Please
note that the Minolta Hotshoe Mount is not compatible with Michron. You
can still use your Michron with Sony cameras, but Michron will not be
able to sit in the hotshoe during operation.
- Sony S1 Cable : DIMAGE A2, A1, 9, 7HI, 7I, 7, 5, 4, 3, DYNAX7D, DYNAX5D
Olympus
- Olympus UC1 Cable :
XZ-1, XZ-2, EVOLT SP-510, SP-550, SP-560, SP-565, SP-570, SP-590,E3-0,
E-620, E-600, E-520, E-510, E-450, E-420, E-410, E-400,E-300, E-30, PEN
E-P1, PEN E-P2, PEN E-P3, PEN E-P5,PEN E-PL2, PEN E-PL3, PEN E-PL5, OM-D
E-M5, E-M1, EP1, EP2, EPL2, XZ1, EPL3, EPM1, EP3, E-M5, E620
- Olympus CB1 Cable : E1, E3, E5, E10, E20,E100 RS
- Not Supported : PEN E-PL1