Alpine Labs Radian Motion Control Time-Lapse Device

Excellent Condition/ Professionally Owned and well cared for with some minor signs of use.

It comes with the cell phone interface cable, a canon camera interface cable,
a usb charging cable, a bag, a level, and manual not pictured.

https://alpinelaboratories.com/pages/radian-1-support-get-started_s



Compatibility: Camera control via shutter cable. Compatible with any camera that has a wired, remote shutter port. See here for a compatibility list. 

Dimensions: 4.57 x 1.77″ (116mm x 45mm)

Weight: 15 oz (425g)

Thread Size: Standard 1/4-20 thread is used in the top and bottom of Radian

Panning Load: 15lbs (7kg)

Tilt load: 4+ lbs
    Tested with the following setup: Canon 5D Mark III, Canon EF 16-35mm f/2.8 LII, and Heavy Duty L-bracket

Table Top load: Tested with Canon Rebel with 18-55 kit lens (Note: a heavy off-axis moment, caused by a large lens, will not allow Radian to balance on a table top unless an off-axis mount is used to shift the camera back)

Angular Resolution: 0.0173° 
    Over 20,000 discrete positions per 360°.  This allows for a shot every 3 seconds for a full revolution over 24hrs with actual movement between each shot

Power Source: Internal Li-ion rechargeable battery gets 100+ hours in pan mode
    Expandable battery life via external USB power packs through USB charging port

Max timelapse speed: 1 degree/second

Max continuous drive speed: 4.3 degrees/second

Ports: USB Micro (for charging, firmware), 2.5mm (trigger port to camera), 3.5mm audio (uploading settings from Radian App), 2 LED ports (battery, shutter indicator; below).

Indicators: Red/Green LED for battery/charging, Red/Green LED - on/off, shooting.


With
  • Canon E3 Cable : 60D, 70D, All 'Rebels' (100D, 300D, 350D, 400D, 450D, 500D, 550D, 600D, 650D, 700D, 1000D, 1100D, etc), T5i, T4i, T3i, T3, T2i,T1i, TXi, XTi, SL1, Kiss, SX50, G10, G11, G12, G15, G16, G1X

****If you have any of these Cameras you will need to purchase:

  • Canon N3 Cable : 10D, 20D,30D, 40D, 50D, 7D, 6D, 1Dx, 1D Mark II, 1Ds Mark II, 1D Mark III, 1Ds Mark III, 1D Mark IV, 5D, 5D Mark II & 5D Mark III
  • Not Supported : SX30, EOS M

 

Nikon

  • Nikon DC2 Cable : Df, D90, D600, D610, D750, D3100, D3200,D3300, D5000, D5100, D5200, D5300, D7000 and D7100, CoolPix P7800
  • Nikon DC1 Cable : D70S,D80
  • Nikon DC0 Cable : F90x, F90, F100, F6, F5 D4, D3, D3x, D3s, D2, D2H, D2Hs, D2X, D2Xs, D1, D1H, D1X, D200, D300, D300x, D300s, D700, D800, D800E & D810
  • Not Supported : COOLPIX P5100, Coolpix L310, D3000, D40, D50, D60, D70

 

Pentax

  • Canon E3 Cable: K3, K5, K7, K30, K500, K50, *istD, *istDL, *istDs, *ist, *istDL2, *K100D, K110D, K10D, K200, K20D, K5 II, K5 IIs
  • Not Supported : GF3, K-x

 

Samsung

  • Canon E3 Cable : GX, 1L, GX 1S, GX-10, GX-20,  NX10 & NX100

 

Contax

  • Canon E3 Cable : 645, N1, NX, N Digital

 

FujiFilm

 

Hasselblad

  • Canon E3 Cable : H Series

 

Sigma

  • Canon E3 Cable : SD1, SD9, SD10, SD14 & SD15

 

Kodak

  • Nikon DC0 Cable: DCS-14n

 

Panasonic

  • Panasonic RS1 Cable: DMC-FZ50 SERIES, DMC-FZ30, DMC-FZ100, DMC-FZ1000, DMC-FZ30, DMC-FZ20, DMC-FZ200, DMC-G1, DMC-GX1, DMC-G2, DMC-G3, DMC-G5, DMC-G10, DMC-GF1, DMC-GH1, DMC-GH2, DMC-GH3, DMC-GH4, DMC- L1 & DMC-L10 SERIES,LC-1,L-1, Lumix GX7 
  • Not Supported : DMC-FZ35

 

Sony

Please note that the Sony Hotshoe Mount is not physically compatible with Michron. You can still use your Michron with Sony cameras, but Michron will not be able to sit securely in the hotshoe during operation. 

  • Sony S1 Cable : A700, A900, A350, A300, A200, A100, A100k, A33, A35, A37, A55, A57, A65, A77, A580, A560, A550, A500, A850, A700, A100,, A99, A900 Alpha S1
  • Sony S2 Cable : A5000, A5100, A6000, A77ii, A7, A7R, A7S, HX50V, NEX 3N, A58, RX100 II, RX100 III, HX300 and 5000L, A7ii, A7Sii, A7Rii
  • Not Supported :  Nex Series (Nex 3, 5, 7,etc), A230, RX1

 

Konica Minolta

Please note that the Minolta Hotshoe Mount is not compatible with Michron. You can still use your Michron with Sony cameras, but Michron will not be able to sit in the hotshoe during operation. 

  • Sony S1 Cable : DIMAGE A2, A1, 9, 7HI,  7I,  7, 5, 4, 3, DYNAX7D, DYNAX5D

 

Olympus

  • Olympus UC1 Cable : XZ-1, XZ-2, EVOLT SP-510, SP-550, SP-560, SP-565, SP-570, SP-590,E3-0, E-620, E-600, E-520, E-510, E-450, E-420, E-410, E-400,E-300, E-30, PEN E-P1, PEN E-P2, PEN E-P3, PEN E-P5,PEN E-PL2, PEN E-PL3, PEN E-PL5, OM-D E-M5, E-M1, EP1, EP2, EPL2, XZ1, EPL3, EPM1, EP3, E-M5, E620
  • Olympus CB1 Cable : E1, E3, E5, E10, E20,E100 RS
  • Not Supported : PEN E-PL1