500W 48V motor brushless controller for electric bike scooter speed control box

Note: The controller is used for DC 48V 500W the brushless motor, not used for the brushed motor, The brushless motor has 3 phase motor lines.

Package Including
1 X 48V 500W Motor Brushless Controller

Features :

100% Brand New

Motor brushless controller for Electric bicycle & scooter

Rated voltage: 48 V

Rated current : 31A

Rated power: 500 W

Matching motor: brushless motor

Under Voltage Protection:41V

Throttle voltage: 1V to 4.2V

Phase angle: 60/120 degrees

Brake level: Low /High

Heat dissipation: Natural cooling

Ambient temperature: -20 degrees to 50 degrees

Protection grade: IP55

Dimensions::15cm(L)x8cm(W)x4cm(H)

Operation Notice:

Connect power, motor, and throttle, and power lock, but not connect the Hall lines. Connect the adaptive learning wire

Switch on the power lock, roll the throttle. If the motor works well, connect the Hall lines

If the motor rolling reversely, disconnect the adaptive learning wire and check the motor again, before connecting the Hall wire.

Wires Interface Definition

Battery : Thick Black (Power Negative) /Thick Red (Power Positive)

Power Lock: Thin Red(power lock)

Motor : Thick Green(Phase lines) /Thick Yellow (Phase lines) /Thick Blue (Phase lines)

Motor Hall lines: Red(+5V)/Black(Negative) /thin Yellow(Hall lines) /thin blue(Hall lines) /thin green(Hall)

Adaptive Learning: Thin white /Thin white, connect  together

Brake(High): Thin yellow(Brake signal)

Brake(Low):Thin Purple(Brake signal)/Thin Black(Brake Negative)

Throttle: Thin Red(Throttle Positive) / Thin Black(Throttle negative)/ Thin Green(Throttle signal)

Instrument: Thin Green(Instrument signal)

Cruise: Thin Blue(Cruise Signal)/Thin Black(Cruise negative) ,connect  together

Speed : Thin Brown(High  Speed signal)/Thin Black(Speed negative)/Thin Blue(Low Speed Signal)

Antitheft power: Thin Black (Power Negative) /Thin Red (Power Positive)

Antitheft Signal: Thin Orange(Power lock) / Thin Blue(Alarms output)/ Thin Green(Signal )

Reverse :Thin Brown(Reverse signal)/Thin Black(Reverse Negative)