INTERCHANGE PART NUMBERS:8972089662,8972089663,7007161,700716-0001, 7001613,700716-5009S,700716-0003,7007164, 700716-4,700716-0004,7007165,700716-5, 700716-0005,7007166,700716-6,700716-0006, 7007167,700716-7,700716-0007,7007169, 700716-9,700716-0009,7007169006, 700716-9006,7007169009,700716-9009, 2901098000, GT2560LS
FITS THE FOLLOWING :
1999-2004 Chevrolet W3500 Tiltmaster W3S042
1999-2004 Chevrolet W3500 Tiltmaster W3S042 Straight Truck - Low Tilt
2002-2004 Chevrolet W4500 Tiltmaster W4S042 Straight Truck - Low Crew Cab
1999-2004 Chevrolet W4500 Tiltmaster W4S042 Straight Truck - Low Tilt
2000-2003 Chevrolet W5500 Tiltmaster W5R042
2003-2004 Chevrolet W5500 Tiltmaster W5S042
2002-2004 Chevrolet W5500 Tiltmaster W5S042 Straight Truck - Low Crew Cab
1999-2004 Chevrolet W5500 Tiltmaster W5S042 Straight Truck - Low Tilt
2004-2004 Chevrolet W5500HD Tiltmaster W5S042
1999-2004 GMC W3500 Forward W3S042
1999-2004 GMC W4500 Forward W4S042
2002-2004 GMC W4500 Forward W4S042 Straight Truck - Low Crew Cab
1999-2004 GMC W4500 Forward W4S042 Straight Truck - Low Tilt
2000-2003 GMC W5500 Forward W5R042
2003-2004 GMC W5500 Forward W5S042
2002-2004 GMC W5500 Forward W5S042 Straight Truck - Low Crew Cab
1999-2004 GMC W5500 Forward W5S042 Straight Truck - Low Tilt
2004-2004 GMC W5500HD Forward W5S042
1998-2004 Isuzu NPR Base
1998-2004 Isuzu NPR Base Straight Truck - Low Tilt
1999-2004 Isuzu NPR-HD Base
2002-2004 Isuzu NPR-HD Base Straight Truck - Low Crew Cab
1999-2004 Isuzu NPR-HD Base Straight Truck - Low Tilt
1999-2004 Isuzu NQR Base
2002-2004 Isuzu NQR Base Straight Truck - Low Crew Cab
1999-2004 Isuzu NQR Base Straight Truck - Low Tilt
NOTED:
Please check the Turbo Model, Turbo Part Number and OEM Part Number on your turbo to make sure it's the right one for your engine.
If you are not sure about these information, please feel free to contact us
1.Turbocharger
2.Gasket Kits
3.Instructions
4.White Gloves
5.Flow report
6.Foam filling material
7.Balancing report
8.Lubricator
![](https://pg-cdn-a2.datacaciques.com/00/MjQ5MTUy/23/03/15/5f2809lr1i2f2651/26a74c2fe4c7ccb8.jpg)
CHECKLIST :
Before fitting the turbocharger:
1. Use new and approved gaskets at the various air, oil and exhaust connections to the turbocharger. Liquid gasket or sealants are not recommended, particularly for oil fittings.
2. Use a high temperature anti-seize compound on all threaded fasteners connected to the turbocharger.
3. Fill the turbocharger oil inlet port to overflowing with clean engine oil before connecting the oil feed hose.
When fitting the turbocharger to the manifold and connecting the respective pipes:
- 1. Before connecting the oil drain hose, crank the engine without firing until steady stream of oil flows from the drain port.
- 2. Operate the engine at low idle for at least three minutes after completing the installation of turbocharger. This will prevent oil starvation damage to the bearing system.
Turbocharger Installation Notice:
- Misuse or modification of the turbocharger can result in serious injury and property damage. Basic safety precautions including the following should always be followed:
- 1. Read and comply with all instructions including the “Checklist ” before installing or using any turbocharger.
- 2. Failure to follow these instructions will lead to premature failure of the turbocharger.
- 3. Only install the turbocharger on an engine which has been approved for such application. The turbocharger is a precision built product which has been matched and tested for use on specific engines only.
- 4. No part of the turbocharger may be altered as it may damage the engine.
- 5. Do not modify or substitute any parts of engine except in accordance with engine owner’s manual. Do not modify the engine fuel control system or restrict the inlet or exhaust system (see engine owner’s manual).
- 6. Do not operate at excessive altitudes (consult Engine Owner’s Manual for altitude restrictions).
- 7. Be sure that oil supply and drain lines are adequate. (See “Checklist ”.)
- 8. Always warm up the engine for 2-5minutes to allow oil to reach the turbocharger before operating under load.
- 9. Perform all maintenance specified by the engine manufacturer each time or at the recommended intervals. Concurrently inspect turbocharger for any deficiencies.
Why Choose Us?
Practical Application
We value the performance of our parts in practical applications. This is our intention to acquire experienced tuning shops. We have the most senior mechanics, the most advanced testing equipments to help us constantly improve the production technology.
|
US Offices and Warehouse
We owns our warehouse and branch offices in United States, Australia and Germany, customer could receive product soon after purchase it.
|
Packages & Cooperative Carrier
Our package's filled with shock-ab-sorbing foam to protect the product maximumly and cooperate with major international logistics companies, the package will be delivered you at the best and reassuring way.
|
Professional Customer Communication
We have own service team.If there's any problem,please feel free to communicate. We'll try our best to help you.
|