Raymarine RS125 GPS RepIacement Antenna for C70, C80 and C120 MFD Plotters
Comes with 5 pin connector that plugs into NMEA socket on rear of Classic C70, C80, C120 MFD
Simply connect 1A fused 12v supply to red and black wire and plug into NMEA port on back of MFD
Cable is 10m long, standard 1" 14TPI antenna mount
Dual 56 Channel
receiver using GPS (US) satellites & GLONASS (Russian) satellites.
Antenna Specification
Receiver Type 56-channel 7020 GNSS chip
GPS & QZSS:L1 C/A,1575.42MHz,
L1OF,1598.0625~1605.375MHz
SBAS: WAAS, EGNOS, MSAS
Horizontal 2.5m (Autonomous)
Position 2.0m (WAAS)
Accuracy (including SBAS & QZSS; CEP, 50%
24hr static, -130dBm, >6 SVs)
Velocity 0.05 m/s (speed)
Accuracy <0.3(heading)
(50%@30m/s)
Time Pulse 30ns (RMS)
Signal Accuracy <60ns (99%)
Time Pulse
Frequency 0.25 Hz ~ 10 MHz
Time To First Fix
Hot start 1.5 sec
Cold start Autonomous 36 sec
(50% -130dBm)
Sensitivity
(Autonomous) -148dBm (acquisition)
-167dBm (tracking)
Navigation.
Update Rate Max. 10Hz, GPS & GLONASS or GPS & Beidou
Max. 10Hz, GPS only
Default 1Hz
Max. Altitude 50,000 m
Max. Velocity <1,852 km/hr
Protocol Support NMEA 0183 v2.3 and V4.x : 9600 bps N,8,1; GGA, GLL, GSA, GSV, RMC, VTG, TXT according to GNSS IC spec using GPS & GLONASS
Electrical Data
Power Supply 12V
Power Consumption 40mA/average tracking (RS232)
Backup power 1.4 ~ 3.6 V
Protocols NMEA,:Binary
Environmental Data
Operating temperature -40C ~ 85C
battery: -20C~60C
Storage temperature -40C ~ 85C