1/2 inch electrical grade Polyimide ( Kapton) tape (108') with pre-cured pressure sensitive silicone adhesive film is designed to operate at elevated temperatures higher than polyester. This heat-stabilized film surpasses the dimensional stability of polyester.
Ideal for wave soldering, insulating circuit boards and where electrostatic discharge is a
concern.
• Has high dielectric strength
• Highly resistant to heat and chemicals.
• Puncture and tear resistant at high temperatures.
• Silicone adhesive protection without leaving any residue
• Temperature up to 500°F / 260°C
• Less than <50 volts Removal from Roll
Available sizes: ¼ , 3/8 , ½, 5/8, ¾, 1, 1 ¼ , 1 ½ and 2 Inches
Specification Values
General
Color : Amber
Material :Anti-Static Polyimide Film
Adhesive: Silicon
Film thickness :1 mil or 0.025 mm
Total thickness :2.5 mil or 0.062 mm
Length :36 Yards or 500 mm
Physical Properties
Adhesion to steel: 0.8-0.9 lbs/inch or 0.35-0.4 kg/25mm
Tensile strength: 28-32 lbs/inch or 14-16 kg/25mm
Elongation at break; (%) ≥ 50 %
Electrical Resistivity
Static Charge: <50 volts Removal from Roll
Dielectric Strength :6-7 KV
Temperature Resistance
Temperature: 500°F / 260°C
Resistance to: acids, oils, solvents Excellent
Various other sizes and volume or repeated business discount available, please contact Cheryl.