HPI Rush Evo 56 Tooth Main Spur gear, and laser cut self adhesive slipper clutch pad.

So following many requests we have created a 3D printed version of the originals, which are made from an ultra hard, wear resistant, Carbon Fibre re-enforced filament, which has been specifically designed to print items requiring high strength and rigidity.

 General Properties of the filament used: 

 Type : Tribo Indstrial strength Filament

Density : 1.4 g/cm3 

Colour : black 

Saturation with moisture absorption at 23°C / 50% r. h. : N/A 

Saturation with water : 0.3 weight % 

 Mechanical Properties : 

Flexural modulus : 4700 MPa4 flexural strength: 87 MPa4) max. 

Permissible surface pressure at 20 °C : 44Nm. 

Shore D hardness : N/A 

 Thermal Properties: 

highest long term service temperature : 200 °C 

highest short term service temperature : 250 °C 

highest short term ambient temperature : 270 °C 

lowest service temperature : -30 °C 

(note - the slightly scuffed appearance on one side is part of the 3D printing support process and is perfectly normal.)

Supplied with one self adhesive clutch pad. These are made in the UK and cut by laser. The back peels off for easy adhesion to the spur gear. (also available as a seperate part. Ebay item number 284208471960)

These Spur gears are printed to order. I normally keep a couple in stock, but please be aware there may be a delay of 24-48 hours for printing, prior to shipping.

I have many more HPI spares for sale. Some are listed on ebay, some are not. Please check my other listings, or feel free to ask me !

Buy With Confidence :-I have been involved with Radio Control models for many years, and have built up a wealth of knowledge on many Nitro vehicles, both old and new. Please review my feedback for customers comments.

Many parts are interchangeable between models. I have a stockpile of spares both new and used for all makes and models of Nitro RC Vehicles, so if you are looking for something specific, please ask.

I also fully refurbish Nitro RC models for resale, so if you are looking for a used but reliable Car /Truck or Buggy, these are listed on a weekly basis.

Note:-Packaged items are sold on a 30 day return basis, and returns will be accepted provided the packaging is unopened.  Used or second hand spares are sold as seen, and are non returnable.

I would ask the winner to please pay promptly within 24 hours of purchase. If this is not possible please contact me. All items are sent via Royal Mail or Insured courier service.

 Please feel free to ask any questions, I will endeavor to answer them promptly both before and after the sale.