(Scroll down for English translation)

Für Fleischmann Art. 7415, 7427, 7428

Umbausatz für die Spur N Fleischmann BR 628, BR 928 und Pendolino zu einem Antrieb mit kräftige Glockenankermotor. Genau so grossartig, doch vielmals billiger als mit einem gleichwertigen Markenmotor. Nach dem Umbau fährt er viel besser, auch bei langsame fahrt. Bauen Sie eine fehlende Motor um oder zum verbessern der Fahrt mit einem neuen Motor.

Für diesen Motoraustausch müssen Sie das Modell öffnen, mit hilfe die eindeutigen Schritt-für-Schritt-Anweisungen auf der Tramfabriek-Homepage. Der alte Motor wird herausgenommen und mann braucht nur die plastik Schnecke (Einfach mit den Finger ab zu ziehen). Ein Schwungrad für der neuen Motor is mitgeliefert. Sie brauchen das Originalschwungrad nicht ab zu ziehen. Ein bisschen Fräsarbeit ist erforderlich, aber ein Video auf den Tramfabriek Homepage zeigt wie mann dass einfach machen kann.

Einhalt:

1 x starke 12V Glockenankermotor 8 x 16 mm mit zwei Wellen.
1 x Motor adapter gehäuse
1 x Schnecke-adapter
1 x Schwungrad

Fleischmann Modell nicht einbegriffen.

Digital kompatibel. CV Einstellungen auf die Tramfabriek Homepage.
Für die Installation brauchen Sie ein Lötapparat, ein Fräsbit (such auf eBay für Angeboten - "milling bit" auf Englisch) und algemeines Modellbahnwerkzeug.
12V Motor auch separat erhältlich. Sehe meine übrige Angeboten.

Einzigartiges Produkt, geliefert direkt vom Hersteller.

5 Jahre Garantie auf Fabrikationsfehler der Teile.
Zahlung mit per Überweisung (IBAN) oder Paypal.
Porto kann kombiniert werden. Ich werde immer das doppelte / dreifache usw. bezahlte Porto erstatten.
Wenn Sie Fragen haben (geht einfach auf Deutsch), zögern Sie bitte nicht, mich zu kontaktieren. Ich bin Ihnen gerne behilflich! Ich verkaufe verschiedene 12V Glockenankermotoren für den Einsatz in Modellbahnen, siehe andere Auktionen.

Ein Produkt von:

Sven van der Hart
Tramfabriek
----

ENGLISH

Compatible with Fleischmann Art. 7415, 7427, 7428

Conversion kit for N gauge Fleischmann BR 628, BR 928 and Pendolino to a powerful coreless motor. Just as fantastic, but at a much lower price than with a similar know branded motor. It will improve the driving capacities dramatically, also at crawling speed. Replace a broken motor or just upgrade for a better ride.

For this easy motor upgrade replacement, you'll have to open the model, following the clear step by step instructions on the Tramfabriek website. The old motor has to be taken out and only the worm will be re-used. The worm can easily be taken off with your fingers. All parts for the new drive are included, including an adapter for the worm and a flywheel. No need to remove the flywheel from the original motor! On the Tramfabriek website you will find a video how to mill the small bit of metal from the frame, to fit the motor, with not too much effort.

Content of the kit:

1 x high quality 12V coreless motor 8 x 16 mm with two shafts
1 x housing for motor
1 x adapter for the worm
1 x flywheel

Compatible with DCC. With this upgrade kit, the decoder can fit under the motor casing. For CV super settings see the Tramfabriek website.

For the installation you need a soldering iron and ordinary modelling tools. You will need a milling bit, which can be found on eBay. This needs to have a flat top, not a round top.

You can find the extensive installation instruction on the Tramfabriek website.

12V motor also separately available. Check my other auctions for that.

5 years warranty on manufacturer faults.

Postage can be combined, when buying other items from my store.

An exclusive product by:

Sven van der Hart
Tramfabriek
Eton Wick, UK

If you have any question, don't hesitate to ask!