This auction is for a BRAND NEW PAIR
of AFR Eliminator Chevy 190cc Fully CNC-ported cylinder heads with 65cc combustion chambers.
AFR's 190cc Vortec "Street" heads are the preferred choice over reworked factory heads. They feature 100% CNC ported intake, exhaust & chambers, A356 aluminum castings and high quality components throughout. Recommended for street, towing, or street/strip engines from 350-383 cubic inches, operating up to 6000 RPM. Not compatible with self-aligning rocker arms. Component upgrade and machining options are available to customize AFR Heads to your specific build.
AFR Part # 0912
There are many different options available for AFR heads, please view the details section below for the details on these heads. Please contact us with questions or check our eBay Store for the many other AFR heads available, and options such as upgrading springs or retainers.
Wholesale Distribution available, contact us and we can create a special listing for you!
The Small Port, High Velocity Torque Monster! AFR's 190cc intake port small block Chevy cylinder heads. These cylinder heads feature a 65cc combustion chamber with a 64cc exhaust port and a 3/4" thick head deck (ideal for nitrous or blower applications.) Standard valves are lightweight 8mm 2.020 intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of idle to 5500 rpm (higher rpm ranges possible depending on combination of parts), 23º valve angle, and standard valve spacing make this the perfect street aluminum cylinder head for 327 cid to 350 cid engines from 1955-86. The exhaust ports are raised .100" over a standard GM L-98 cylinder head.
Note: Hydraulic roller cams typically experience valve float at 6000-6200 rpm because of their fast ramp rates. AFR suggests you upgrade your springs to AFR part #8019, 1.270 O.D. with higher spring pressures to reduce chances of valve float associated with rpm’s 6200 or higher, but smaller cams with less than .500 lift can rev to 6500 rpm with the included springs.
Due to the large demand for AFR heads, AFR currently takes 3-4 weeks to build a set of heads. Contact us now to check if we have the heads you want sitting on our shelves!
|
Basic Package Components |
Part # |
100% CNC Ported Combustion Chambers
100% CNC Ported Exhaust Ports
100% CNC Ported Intake Ports
Competition 5-angle Valve Job |
|
8mm Bead Lock Intake Valve 2.020" x 4.900" O.A.L. |
AFR #7251 |
Bead Lock Exhaust Valve, 1.600"
|
AFR #7250 |
PAC Racing Spring 1.290" OD Hydraulic Roller Dual Valve Spring, 140 lbs on seat, .600" maximum lift, Max RPM 6300-6500 (upgrades available) |
AFR #8017 |
7° Chrome Moly Retainers |
AFR #8514 |
7° Bead Lock Valve Keepers |
AFR #9007 |
ARP 3/8" Rocker Studs |
AFR #6409 |
Adjustable 5/16" Guide Plates |
AFR #6103 |
Viton Valve Seals |
AFR #6612 |
Hardened Spring Cup |
AFR #8042 |
Ductile Iron Intake Valve Seats 2.200" O.D x 1.750" I.D x .375" Deep |
AFR #9060 |
Ductile Iron Exhaust Valve Seats 1.696" O.D x 1.325" I.D x .305" Deep |
AFR #9070 |
Bronze Valve Guides |
AFR #9051 |
Specifications, Features, and Optional Supporting Components |
Head Material |
A356 Aluminum
|
Intake Port Volume |
190cc |
Intake Port Dimension |
2.320" H x 1.297" W x 3/8° Radius |
Intake Port Location
|
Stock |
Exhaust Port Volume |
64cc |
Exhaust Port Dimension |
1.450" H x 1.550" W |
Exhaust Port Location |
.100" Raised |
Combustion Chamber Size |
65cc |
Valve Cover Bolt Pattern
|
Center & Perimeter Bolt |
Valve Angle |
23°
|
Valve Spring Pocket Diameter |
1.460" O.D |
Max Valve Spring Pocket Machining |
1.750" O.D
|
Deck Thickness
|
.750"
|
Minimum Bore Diameter |
4.000" |
Flat Mill |
.006" per cc 60cc Maximum |
Angle Mill |
.009" per cc 55cc Maximum |
Minimum Cross Sectional Area
|
2.070 sq. in.
| Note:Angle mills might require a .120" Thick intake gasket. |
Spark Plug Dimensions |
14mm x .750" w/Gasket Seat |
Intake Port Gasket
|
GM Vortec
|
Exhaust Port Gasket, Fel-Pro #1404 |
AFR #6834
|
Head Gasket, 350cid Fel-Pro #1003 |
AFR #6803
|
SB Chevy Head Bolt Kit, ARP #134-3701 | AFR #6310 |
SB Chevy Head Stud Kit, 12 Point Nuts, ARP #234-4301 | AFR #6305 | Head Bolt Washers, Manley | AFR #6320 |
Stud Girdle GM L98 | AFR #6200 |
Spark Plug Starting Range | Autolite 3924 |
|
|
Suggested Manifold | GM or Aftermarket Vortec |
|
|
Important: Do not port match you intake manifold to any Fel-Pro gasket as it does not precisely match AFR heads.
Note: Milling head deck will affect flow numbers. Angel mills might require .120" thick intake gasket.
We have AFR heads to fit almost every performance application!
Check out our eBay Store
or contact us
|
-IN STOCK ITEMS- Ship no later than the second business day after receiving cleared payment.
Any item paid for with an echeck through PayPal will not ship until the money clears, typically 3-5 business days.
Check at www.ups.com for your location.
-USPS Priority Mail- 1-4 days but no detailed tracking with this service.
-USPS Express Mail- 1-3 days and more detailed tracking than priority.
BUYER BEWARE - NO TRACKING with this service.
- USPS Express Mail- HIGHLY RECOMMENDED 3-5 days typical delivery time with tracking, but as long as 2-3 weeks on rare occasions.
- UPS Worldwide Expedited - 3-9 days GUARANTEED! (Most Countries, check UPS.com)
- UPS Worldwide Saver - 1-5 days GUARANTEED!
All customs fees are paid by the receiver.
Please research your customs fees with your local government before ordering so you know what to expect to pay once the shipment arrives.
We do not lower invoice values since it is a violation of US and International custom laws.
All international shipments are shipped with the correct value for the parts shipped.
eBay's NEW Feedback and Detailed Seller Ratings (DSRs)
If you give us 4 Stars, it may seem like a good score, technically a 4 is "Satisfied", eBay, however, considers this a low grade. eBay requires sellers to maintain very high standards to continue receiving the best pricing, which leads to lower item costs for the customer. If you were satisfied with the transaction, please leave positive feedback with all 5 Stars for the DSR ratings.
Please be patient and don't give negative feedback or below 5 star Detailed Seller Ratings without talking to us first.
Let us work to resolve your problem so everyone is happy.
Credit card payments can be made by calling
Due to eBay policies, sellers are no longer allowed to accept any other method of payment for eBay items besides credit card, debit card or paypal.
This means that TREperformance is not allowed to accept other payment methods for any item purchased through eBay.
It is always acceptable to visit our store in person to make payment and pickup your item at:
TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627
We also must charge a 20% restocking fee on any order which is cancelled after payment has been received, even if that order has not shipped. This is also to help cover the fees associated with eBay, PayPal, order processing, restocking, etc. If you would like to return or exchange an item please email us with your paypal or authorize.net transaction id # and the reason for the return or exchange.
No returns are accepted without an RMA number which is given to the customer by TREperformance via email. Always have the RMA number clearly written on multiple sides of the package when you return the item. If it is not clearly written on multiple sides of the box it may be returned to sender. All returns must be received within 30 days of purchase.
ACCEPTANCE OF TERMS:
Your bid is a contract! By clicking upon "Place Bid" or "Buy It Now" or "Make Offer" the Buyer acknowledges that this action shall be treated as a legally binding "electronic signature," as this term is defined under federal law in the Electronic Signatures in Global and National Commerce Act of 2000. Buyer also acknowledges that he/she has read this web-page, as well as eBay's "Rules for Buyers" in there entirety, and has unconditionally accepted all terms included therein. Buyer also thereby warrants that he/she has any applicable legal authority to purchase this equipment, and that he/she will not use, sell, or otherwise distribute this item in any manner in violation of applicable state and federal laws. Buyer also agrees to indemnify and hold harmless TREperformance for liability from any and all claims arising out of Buyer's use, sale, or other distribution of this item. No refunds will be given unless the buyer receives prior written approval from TREperformance, and no repairs will be provided, nor labor charges covered by TREperformance in any situation. Seller reserves the right not to sell to bidders with excessive negative or "0" feedback.
Contact info:
Email Anytime
Phone and Storefront Hours: Monday - Friday 8:00 AM - 4:00 PM PST
TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627
|