Logo
Shower Door Seals
Options for 3-12mm thick glass and gaps of 12-50mm

 Please read the help section and item description at the foot of the page before selecting your seal. 
This listing shows one design of seal, many other designs are available in our Ebay shop which you can view here:- Shower-Seal-UK-Ltd Ebay Shop 

Clear images of each seal and technical drawings are shown in the listing gallery if required

    • Seal Selection Help

      Step 1 Step 2 Step 3
  • Check your measurements and then choose the most suitable seal from the seals shown. Select the correct seal code from the dropdown bar at the top of the page and then pick the length in the second dropdown box from a 25mm sample, 800mm, 900mm, 1400mm and 2000mm

  • We would advise using a seal with a bottom fin roughly 2-5mm bigger than your maximum gap. If your gap varies please remember this may make the fin a little tight at the smaller gap end but you can always cut the fin back slightly with scissors if needed. 

  • If your seal passes over a threshold or upstand we would advise you not to a select a seal with a fin height any bigger than the gap between the bottom of the glass and top of the threshold and upstand

  • If you are unsure which seal to order you can post us a small piece of your old seal and we will try to match it for you.  

    Fitting Help
  • Simply remove your old seal and clean the glass. Starting at the hinge end and from below the door push the seal up on to the glass an inch or so at a time. Do not try to slide the seals on to the glass as this may result in damage. No lubricant or glue should be needed but you may find installation is made easier by warming the seal slightly in warm water or with a hair dryer first.

    Other Information

  • These seals are sold straight and as sold are suitable for straight doors only. If you would like one of these seals for a curved door please contact us as we can quote to curve them to order for you. This listing shows one design of seal, many other designs are available in our Ebay shop which you can view here:- Shower-Seal-UK-Ltd Ebay Shop 
  • If necessary the new seal can be cut to size with secateurs, a hacksaw or sharp knife.
  • Strong, durable and easy to install.
  • No DIY knowledge necessary.
  • Available in any quantity for bulk orders.

    International and offshore postage

  • We can only send sample seals and seals of 800mm and 900mm length to international locations and offshore UK areas. We can not send 1400mm or 2000mm lengths to these locations. Orders of 1400mm or 2000mm to these locations will be cancelled or a delivery supplementcan be paid. Please contact us before purchase if you like a quote on shipping a longer item outside mainland UK or offshore.