Aidetek silicone rubber wire 7 in 1 set needle tipped tip alligator clips mini-grabber 

test leads for multimeter DMM tester TLP20258 

1) silicone rubber wire test leads, 16A, IEC1010-031 CAT II: 1000V P3605-2  

Silicone-insulated test leads are more flexible, more heat and burn resistant, more chemical and 

solvent resistant, and less sensitive to environmental temperatures.

 Ф3.6mm test lead

Test leads meet the RoHS and CE requirement

Ф2mm copper test tip with right angle ten plug and safety cap

Wire material: Silicon Rubber wire Ф3.6*65*0.10

IEC1010-031 CAT II: 1000V

Max rated current: AC 16A

Standard length: 850mm
high temperatures up to 200oC and lows down to -90°C

Good oil and solvent resistance, and good corona, and ozone and weathering resistance.

2) Two ( one red + one black) alligator clips with removable insulators  

Whole Length: 5cm, 1.2cm The maximum size of the opening

3) Two plunger mini-hooks mini-grabber ( one red + one black) with 0.16 inch banana plug tip , 

Whole length: 60cm (23.58 inch)

4)  Two ( One red + one black) silicone rubber wire  lead extensions,  Shrouded 

banana plugs at both ends, Whole length: 50cm (19.68 inch) P2050

Rated Voltage: 300V

Material: Silicone rubber

Thickness: 0.60mm

Diameter: 2.2mm

Vol. Test ( AC. V. 60S): 2000V

Conductor resistance: 36.7 ( MAX)  ohm/Km

Insulator resistance: 1000 Mohm / m

Flame Test: Horizontal flame

5) A pair of sharp Stainless Steel Needle Tipped Tip Multimeter Probes Test Leads  

600v 1a 4mm Socket,Whole Length: 129.5mm Needle length: 20.5mm,Match with the test 

lead of Multimeter or Oscilloscope Advantage: Lengthened sharp and hard stainless steel needle

(Dia.1mm) can easily pierce the surface of cable but doesn't destroy it.It can be widely used about 

the non-destructive cable test in auto,Telecom,Industry or test inside of the plug. 

Available color:Red Black 

Metal material:Brass、Stainless Steel 

Insulator material:PA Rated voltage/current:CE CATII 600V /MAX. 1A Connect 

method:4mm socket connectio

6)Two ( one red + one black)  modular 4 inch heavy duty test probe handles  

Length: 10.5cm

Material: Insulator:PA

Body:Brass

Spring:Beryllium copper

Surface:Nickel plated

Rated voltage/current:

CATII 1000V/Max.32A, CE certificate

Feature

Safety test probe with 4mm socket connection. Spring-loaded tip

1 2 3 4 5 with the protective cap.

7)  AideTek TL5 rubber wire  banana jack Alligator clip test leads 20 cm red+black

4 mm Test lead of alligator clip (alligator clip) connected to the tip of banana jack 4mm;

Used as a substitute for a regular rod-shaped test lead, it will not easily come off even if a sudden 

tension or shock is applied during the test;

Hold a socket that can insert 4 mm banana plug;

Total length 20 cm. One set of red black (1 red / 1 black).

Length: 20cm / 7.87″

Housing: ABS

Conductor: Nickel-plated brass

1500Vdc / 10A

Shipping:  USA orders will ship from USA, other orders will ship from China via post office 2-3 weeks with track #, thank you
Start selling to international eBay sites.
eBay Cross Border Trade powered by ChannelEffect