The Peroxide test strip is calibrated at 0, 100, 200, and 400ppm, and gives results in just seconds. This test strip can be used to test pools and hot tubs where peroxides, rather than chlorine, are used to sanitize. Recommended peroxide levels vary, therefore, the test strip can be used to test the concentrations users prefer.

Results of these test strips are shown in parts per million (ppm) of Hydrogen Peroxide (H₂O₂).

• Simple Dip-Wait-Read Testing Method
• Ideal for on-site water testing
• Test strips are stored in a plastic container with a detailed colour chart to protect them
• Ideal for quick and reliable test of water
• No MSDS required
• Accurate results are achieved in under one minute

These strips provide accurate, immediate results at an affordable cost.

Suitable for: fresh water samples, including water from taps, wells, springs, boreholes, ponds, as well as rain water

Contains: 50 test strips

Testing Levels: 0, 100, 200, and 400ppm

Total Test Time: approx. 35 seconds

How to Use:

1. Remove one test strip from the vial. Do not touch the test pad with your fingers.
2. Dip the test strip into the solution being tested for 1 second.
3. Remove and shake off any excess liquid.
4. Compare the test pad to the color chart after 30 seconds.

NOTE: If this test strip is used in very high concentrations of Peroxide (above 2000ppm or 0.2%), the test strip will not turn purple. Instead, it will turn an off-white with a hint of green.

Interferences: other oxidising agents, such as free chlorine, similar colour developments may occur

Please note: Store in a cool, dry (below 32°C) place and away from excess heat and direct sunlight. No MSDS required. Keep away from children and pets. Avoid contact of test areas on strips with skin & eyes, do not ingest or expose to acids.

Made in USA