Description of the size of the PVC water supply pipe (Inch, DN, nominal comparison table) | ||
Zoll | DN | Nennaußendurchmesser (mm) |
1/8" | DN6 | φ9.5 |
1/4" | DN8 | φ13.5 |
3/8" | DN10 | φ16.5 |
1/2" | DN15 | φ20 |
3/4" | DN20 | φ25 |
1" | DN25 | φ32 |
1 1/4" | DN32 | φ40 |
1 1/2" | DN40 | φ50 |
2" | DN50 | φ63 |
2.5" | DN65 | φ75 |
3" | DN80 | φ90 |
4" | DN100 | φ110 |
The size of the PVC water supply pipe is different from that of the drain pipe. Before buying, pay attention to the conversion in mm. |
※ Connection method: The pipe fittings are glued, not hot melt. Except for pipes and cores, most pipe fittings refer to the inner diameter, such as a 20mm elbow, which means the inner diameter of the elbow is 20mm. For specific data, please refer to the detailed description or contact customer service.※ Installation of PVC pipe fittings: After the pipe is coated with glue, it is inserted within one minute, and the installation takes 15 minutes to set the shape. It will have a certain strength within 2 hours, and the effect of water supply after 24 hours will be better.※ The size of PVC water supply pipe is different from that of drainage pipe. Please pay attention to the conversion to mm before purchasing.※ Important note: Even if you want to order more varieties from this offer, all selection fields must first be set to "Select" before making a selection!※ Using the "add to cart" function, no matter what you buy or how much you buy, the shipping will be automatically calculated once. (Except for special products with other requirements)
Dimensional error information: When manufacturing parts, to make them interchangeable, the parts should be within the specified maximum and minimum limits. The permissible size variation is: tolerance, but they all fall within the scope of the industry regulations. Contact online customer service for information on specific tolerances. When the product is ordered, the tolerance is accepted by default.