Item
|
Specifications
|
Product Number
|
LX-101-P
|
Sensing range
|
10 ± 3 mm 0.394 ± 0.118 in
|
Spot size
|
1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
|
Supply voltage
|
12 to 24 V DC ± 10 % Ripple P-P 10 % or less
|
Current consumption
|
Normal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)
|
|
ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
|
Output 1(OUT)
|
PNP open-collector transistor
|
|
- Maximum source current: 50 mA
|
|
- Applied voltage: 30 V DC or less (between output and +V)
|
|
- Residual voltage: 1.5 V or less (at 50 mA source current)
|
Output 1:Short-circuit protection
|
Incorporated
|
Output 1:Output operation
|
Mark mode: Light-ON / Dark-ON (Auto-setting on teaching)
|
|
Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
|
Output 2(OUT)
|
PNP open-collector transistor
|
|
- Maximum source current: 50 mA
|
|
- Applied voltage: 30 V DC or less (between output and +V)
|
|
- Residual voltage: 1.5 V or less (at 50 mA source current)
|
Output 2:Short-circuit protection
|
Incorporated
|
Output 2:Output operation
|
Inverted operation of the output 1
|
Response time
|
Mark mode: 45 micro s or less
|
|
Color mode: 150 micro s or less
|
Teaching input
|
PNP non-contact input
|
|
- Signal condition: High... +4 V to +V (sink current: 3 mA or less), Low... 0 to +0.6 V, or open
|
|
- Input impedance: 10 kOhm approx.
|
Digital display
|
4-digit red LED display
|
Sensitivity setting
|
Mark mode: 2-level teaching / Full-auto teaching
|
|
Color mode: 1-level teaching
|
Fine sensitivity adjustment function
|
Incorporated
|
Timer function
|
Incorporated with variable ON-delay / OFF-delay timer,
|
|
switchable either effective or ineffective
|
|
(Timer period: 1 to 500 ms, 9 levels variable)
|
Protection
|
IP67 (IEC)
|
Ambient temperature
|
-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
|
|
Storage: -20 to +70 ℃ -4 to +158 ℉
|
Ambient humidity
|
35 to 85 % RH, Storage: 35 to 85 % RH
|
Ambient illuminance
|
Incandescent light: 3,000 lx or less at the light-receiving face
|
Voltage withstandability
|
1,000 V AC for one min. between all supply terminals connected together and enclosure
|
Vibration resistance
|
10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each
|
Shock resistance
|
500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each
|