Applications
  
ADC/DAC/Operational Amplifier Reference voltage
 
RS232 RS485 RS422 Bus
 
Audio equipment
 
Low power audio power supply
 
Car audio amplifier dual power board
 
LCD power supply
 
Instrumentation equipment
 
Instrumentation multimeter

 

 

Product Name:   20W +- 5-24V Positive & Negative Dual Output Power Supply Boost-Buck Converter 


Packing list:  1 PCS 20W DC DCStep-up/Step-down Converter Positive and negative voltage Dual voltage Module
 
 
 
 
 
 
Description:
 
Input voltage 3.6~30V,output ±3~±30V adjustable
 
Maximum output power: 20W (For details, please see the description at the bottom or ask us for information.)
 
Conversion efficiency :69-89%
 
Quiescent current: 3-4mA
 
20W DC-DC Boost-Buck Converter working frequency 180KHZ. 
 
Operating ambient temperature : -40~+85 Degrees Celsius
 
Size : 60 x 34 x 15mm
 
Weight :  33g(With terminal), 29g(no terminal)
 
High efficiency up to 89%
 
Built in Frequency Compensation
 
Built in Soft-Start Function
 
Built in Thermal Shutdown Function
 
Built in Current Limit Function
 
      
 
Note:
 
1 In order to obtain a more stable voltage, it is recommended that the output is greater than 15MA
 
2 V- cannot be used alone, or no voltage output.But you can just use V+ 
 
3 The startup current of the module is 2.5-3 times the operating current.
 
4 Increasing the 1UF-10UF MLCC capacitor reduces the startup current(As shown below)
 
 
 Attention :
    
This is a DC-DC voltage converter module,Must be noted when using:
 

1 Input voltage can not be greater than the maximum input range


2 Output power can not be greater than the maximum load for a long time


3 Input power must be greater than the output power, because the power consumption of the module itself

 

 
Q & A:
  
Q1 : Why output voltage is less than the nominal voltage
 
A1: Input power supply power is too low.Test the input voltage with a multimeter,a t this time of the input voltage is very low
 
 
Q2 : Why is the negative voltage not output or the output too low?
 
A2 : The negative voltage cannot be used alone. When using a negative voltage, the same load must be connected at the positive voltage terminal.
 
 

The maximum output power can reach 20W, but the maximum power will vary under different conditions. For details, please refer to the following table(10-80% of the maximum power is the most reliable):

 

5V/±5V Output
 
6V/±6V Output
 
9V/±9V Output
 
 
10V/±10V Output
 
12V/±12V Output
15V/±15V Output
 
24V/±24V Output