150W 6" Bench Grinder With An Add-On 5" x
1/2" Metal Polishing Kit
Suitable for Polishing Aluminium, Alloys and Brass
** As this machine has a small 150W motor it is
suitable for light polishing work only eg craft work, model making, using light
pressure. Kits with more powerful motors can also be seen in our Ebay Shop
Assembly – The Bench Grinder and Polishing Kit are supplied
separately. The buyer needs to Assemble the Polishing Kit to the Bench
Grinder. For Assembly Instructions and Kit Contents Please Read
Below. Tools required (not supplied) are a 19mm spanner and a Philips
Screwdriver.
Dimensions - With Spindle Adapters Attached
Width - 40cms
Height - 15cms
Depth - 12.5cm
Splash Guards (Optional Extra) - These are mounted behind the bench
grinder / polishing wheels and catch surplus polish and debris which flies off
the spinning polishing wheels during polishing. These are available to purchase
from our Ebay Shop under Ebay Listing # 284916234343
1 x BlueSpot 6" 150W (1/5hp) Bench Grinder
230v
2950 rpm.
Electric Plug. Supplied fitted with a UK 3 Pin Electric Plug. International
buyers need to fit their own plug / adapter which is suitable for use in their
own country.
Comes supplied fitted with
1 x 150mm Fine Grinding Wheel
1 x 150mm Medium Grinding Wheel
Please Note - the Motor will Run Hot. This is normal. The run time is around
10 minutes on, allow to cool, then continue. Do Not Push Hard against the
polishing wheels. This will strain / damage the motor, invalidating the
warranty. Using Light Pressure with the correct polishing procedures and this
will get satisfactory results.
Warranty - Bench Grinder 1 Year
Safety - When polishing using the spindle adapters attached to the
bench grinder, suitable safety glasses, gloves and dust mask (not supplied)
must be worn
Scratch Removal - If there are scratches in the item surface then a
series of abrasive discs / pads (eg 500 to 2000 Grit) may need to be used first
prior to the polishing process.
Assembly - The Polishing Kit is supplied separately to
the Bench Grinder and needs to be assembled / attached by the following
method.
Spindle Adapter Fitting
Once the bench grinder side guards and the grinding wheels have been
removed (please note that the left hand grinder shaft has a left hand nut), the
mop spindle adapters are then slid over the grinder shafts. There is a right
hand and a left hand spindle adapter in the kit. Please remove the grub screws
in the adapters first and then fit the adapters as far as they will go onto the
shaft. Once fitted, reinsert the grub screws (one in each adapter) and tighten
them using your allen key (not supplied)
Polishing Add-On Kit Contents
Adapters
2 x Bench Grinder Spindle Adapters (1 x left and 1 x right)
These are used to attach polishing mops to the bench grinder shafts.
Polishing Wheels
1 x 5" x 1/2" Sisal Metal Polishing Wheel.
1 x 5" x 1/2" White Stitch Metal Polishing Wheel.
1 x 5" x 1/2" Swansdown Soft Polishing Wheel.
Polishing Compound Bars – Weight Approx. 100gms (vary 90gms to
105gms) – Dimensions - Approx. 85mm x 20mm x 27mm. see additional image
2 x Blue Bars
2 x Brown Bars
1 x Cloth (colour may vary)
1 x Instructions
Shipping To - Northern Ireland, Channel
Islands, Isle of Man, Isle of Wight, and certain Scotland Post Codes
(including some Aberdeenshire Post Codes) as can be seen listed below -
Please Note. The Free Post and
Packaging to the above areas does not apply to this listing as
the carriers charge a premium to deliver to those areas. Please
kindly contact us for shipping rates which will be charged extra,
prior to making your purchase.
UK Shipping
UK Areas and Post Codes Where Free Shipping
Is Not Offered. Please
contact us for shipping rates.
- Northern Ireland
- Isle Of Man
- Isle Of Wight
- Channel Islands
- And the following Scotland Post Codes
AB31 to AB38
AB40 to AB56
HS
IV1 to IV28
IV30 to IV32
IV36 to IV40
IV41 to IV49
IV51, IV55 & IV56
IV52 to IV54
IV63
KA27 and KA28
KW1 to KW14
KW17 to KW17
PA20
PA41 to PA49
PA21 to PA38
PA60 to PA78
PH4 to PH41
PH41 to PH42
PH49 to PH50
ZE
* Large Parcels
We send by overnight carrier and the consignment tracking number is uploaded to
the buyer’s Ebay account. Please make sure there is somebody available to
receive and sign for the consignment. The carrier will only attempt to deliver
twice and if there is nobody there on both occasions the receiver will then
have to collect from their local depot within 5 days.
International Shipping
We ship to eligible countries using Ebay’s Global Shipping Programme. Further
details can be viewed at
http://pages.ebay.co.uk/help/buy/shipping-globally.html