ETCR6800D Clamp Meter is specially designed for measurement online of AC/DC leakage current with voltage below 600V; by adopting up-to-date CT technology and digital integration technology, There is not metallic conductor outside the clamps, non-contact test to ensure save. It is a product with relatively small size, large clamp, high accuracy and perfect function, widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining. It is essential tool for electrician safety testing.
This High Accuracy Clamp Leaker have the function of peaking holding, data holding data storage; obtains one USB interface. With the help of the software that we provide, many functions are available. For example, the meter can realize on-line monitoring, historical data inquiry, active curve drawing, indication of max, min and average value and indication, alarm value setting, indication of alarm value, historical data inquiry, export, and print.
Ⅱ Technical Specifications
Function |
Measure AC/DC current, peak hold, online monitor |
Size of clamp
|
Φ68mm |
Range |
0.0A~2000A DC/AC |
Accuracy |
±2%rdg±3dgt |
Resolution
|
0.1A |
Dimension
|
224mm×115mm×43mm |
Data interface
|
USB |
Weight
|
515g(with battery) |
Power Supply
|
Zn-Mn dry battery 6F22 9V, lasting for100hours |
Test Mode
|
Clip-on CT, noncontact mode |
Display Mode
|
Four digits LCD display |
LCD Dimension
|
35mm×21.5mm; display domain: 32mm×15mm |
Frequency
|
AC 45Hz~400Hz |
Sampling Rate
|
2 times/s |
Polarity Indication
|
DC current auto identified and display“—” |
Test Position
|
Tested wire in the jaw center; Error will increase to 1.5%rdg max if deviate the center |
Range Shift
|
Automatically |
Line Voltage
|
AC600V |
Software
|
with the software the data can upload to computer |
Data Memory
|
99units, FULL blinks when the memory is full |
Peak Hold
|
Push HOLD without release, the meter will show the peak value during the pushing period |
Reading Hold
|
DH indicating the reading is hold |
Out of Range
|
OL indicating the current is out of range |
Auto Power-off
|
5 Minutes after power on, it will power off automatically to lower the power consumption |
Battery Voltage
|
Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed |
Consumption
|
10mW |
Temperature and Humidity |
-10℃~50℃; Below 80%rh |
Max error refer to environment
|
-10℃~0℃,40℃~50℃,Error will increase max to 1%rdg |
Temperature and Humidity for storage
|
-10℃~60℃,below 70%rh |
Insulating Strength
|
AC2kV/rms. (between the alloy of the clamp and the housing) |
Applicable safety rules
|
IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) |
Accessories
|
Meter: 1pc; USB communication line: 1pc; software: 1pc; battery (6F22 9V):1pc. |
Ⅲ Field application
Notice:
The standard package don't include batteries.Because,the international air shipping forbid to ship liquid,powder and batteries,we can not put them in the package box.Hope you can understand buy them in your local store or supermarket.Thanks for your support!