Description
AIBBC TA-200 Power Amplifier Bluetooth DAC Headphone Amp Electronic Tube Decoding XMOS+ES9038 DSD 12AU7-S Tube
Specifications:
Input Z: RCA input 22KΩ
Output Z: 10Ω
Linear input sensitivity: 400mV ±50mV
Frequency response:9Hz-160KHz-3dB 30Hz-30KHz 0dB
SNR (typical): â§90dB
Inter-channel crosstalk: >65dB, 1KHz
THD+N,1KHz: <0.3%, 100mW into 25Ω
SMPTE IMD:0.3%,100mW into 25Ω
Net weight: 0.9kg
Size: 178 x 130 x 62mm (L*W*H)
External power: 13V AC*2, 1500mA
Usable headphone impedance range: 8Ω-1KΩ
Features:
-The DAC chip adopts ES9038Q2M, with 32BIT/384KHZ HyperstreamTM DAC patented structure, as well as 129dB dynamic range and -120dB distortion, which can reach 32BIT 376KHZ PCM, DSD256 VIA DOP, NAITVE DSD512. It is a rare high-performance DAC chip in the industry today. TA-200 has given full play to the strength of this chip, and with its super high performance, it can satisfy very demanding audiophiles.
-The coaxial/optical fiber audio source input is received by the AK4113 directly into the ES9038 decoding, supporting external high-quality digital audio sources.
support format:
PCM: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz
DSD: 2.8MHz (DSD64)-DoP native, 5.6MHz (DSD128)-DoP native, 11.2MHz (DSD256)-DoP native.
-USB digital interface XMOS (XU208) and the industry's high-level 32BIT/376KHZ ES9038 DAC decoding IC design, support DSD 512 hard decoding, built-in USB digital interface XMOS XU208 and DAC decoding integration advantage is the very short transmission distance Get better sound quality.
-Independent rectification and power supply. USB input directly supports native OTG input. Support Bluetooth playback, using the highest level CSR8675 audio dedicated Bluetooth chip.
-Input options: CD/USB/OPT/COAX/USB/BT six-channel audio input selection.
-Output options: headphone output, volume control pre-output (balanced and unbalanced RCA output).
-The amplifier is tube amplification + TI TPA6120 power amplification, including tube amplification, pre-amplification, push amplification, power amplification and tube feedback recovery, combining the characteristics of TI power amplifier rate amplification and electronic tube.
-High-fidelity headphone amplifier designed with full high-power amplifier, strong thrust, rear gain switch, 8-1000Ω impedance fully adapted.
Material Description:
-All aluminum structure design, exquisite aluminum knob, exquisite and elegant.
-A large area of heat dissipation holes are used on both sides and top of the chassis.
-Volume potentiometer adopts Taiwan-made double-connected precision potentiometer and imported high-quality carbon film.
-The power switch and input selection switch are all genuine and high-quality parts made in Taiwan.
-The power filter capacitor adopts ruby, black diamond fever capacitors and some Nissan high-frequency and low-impedance audio special capacitors to adjust the sound quality and tone. The decoupling and feedback capacitors use the ultra-high grade KZ series audio dedicated coupling capacitors in the Nichicon MUSE series, and the signal coupling transmission uses Elna silmic2 fever capacitors.
-The relays are all original Japanese Omron relays with stable and reliable quality.
-PCB is designed and manufactured with double-sided, black oil and RoHs. The signal transmission loss is negligible.
-All the crystal oscillators in DAC adopt high-precision silicon crystal oscillators, which have very good stability.
-Separated design of power supply and host, completely eliminates interference from power supply to host.
-Using pure copper gold-plated RCA, gold-plated external socket and high-precision parts.
Package List:
-1 x Amplifier
-1 x USB Cable
-1 x Manual
Specifications:
Input Z: RCA input 22KΩ
Output Z: 10Ω
Linear input sensitivity: 400mV ±50mV
Frequency response:9Hz-160KHz-3dB 30Hz-30KHz 0dB
SNR (typical): â§90dB
Inter-channel crosstalk: >65dB, 1KHz
THD+N,1KHz: <0.3%, 100mW into 25Ω
SMPTE IMD:0.3%,100mW into 25Ω
Net weight: 0.9kg
Size: 178 x 130 x 62mm (L*W*H)
External power: 13V AC*2, 1500mA
Usable headphone impedance range: 8Ω-1KΩ
Features:
-The DAC chip adopts ES9038Q2M, with 32BIT/384KHZ HyperstreamTM DAC patented structure, as well as 129dB dynamic range and -120dB distortion, which can reach 32BIT 376KHZ PCM, DSD256 VIA DOP, NAITVE DSD512. It is a rare high-performance DAC chip in the industry today. TA-200 has given full play to the strength of this chip, and with its super high performance, it can satisfy very demanding audiophiles.
-The coaxial/optical fiber audio source input is received by the AK4113 directly into the ES9038 decoding, supporting external high-quality digital audio sources.
support format:
PCM: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz
DSD: 2.8MHz (DSD64)-DoP native, 5.6MHz (DSD128)-DoP native, 11.2MHz (DSD256)-DoP native.
-USB digital interface XMOS (XU208) and the industry's high-level 32BIT/376KHZ ES9038 DAC decoding IC design, support DSD 512 hard decoding, built-in USB digital interface XMOS XU208 and DAC decoding integration advantage is the very short transmission distance Get better sound quality.
-Independent rectification and power supply. USB input directly supports native OTG input. Support Bluetooth playback, using the highest level CSR8675 audio dedicated Bluetooth chip.
-Input options: CD/USB/OPT/COAX/USB/BT six-channel audio input selection.
-Output options: headphone output, volume control pre-output (balanced and unbalanced RCA output).
-The amplifier is tube amplification + TI TPA6120 power amplification, including tube amplification, pre-amplification, push amplification, power amplification and tube feedback recovery, combining the characteristics of TI power amplifier rate amplification and electronic tube.
-High-fidelity headphone amplifier designed with full high-power amplifier, strong thrust, rear gain switch, 8-1000Ω impedance fully adapted.
Material Description:
-All aluminum structure design, exquisite aluminum knob, exquisite and elegant.
-A large area of heat dissipation holes are used on both sides and top of the chassis.
-Volume potentiometer adopts Taiwan-made double-connected precision potentiometer and imported high-quality carbon film.
-The power switch and input selection switch are all genuine and high-quality parts made in Taiwan.
-The power filter capacitor adopts ruby, black diamond fever capacitors and some Nissan high-frequency and low-impedance audio special capacitors to adjust the sound quality and tone. The decoupling and feedback capacitors use the ultra-high grade KZ series audio dedicated coupling capacitors in the Nichicon MUSE series, and the signal coupling transmission uses Elna silmic2 fever capacitors.
-The relays are all original Japanese Omron relays with stable and reliable quality.
-PCB is designed and manufactured with double-sided, black oil and RoHs. The signal transmission loss is negligible.
-All the crystal oscillators in DAC adopt high-precision silicon crystal oscillators, which have very good stability.
-Separated design of power supply and host, completely eliminates interference from power supply to host.
-Using pure copper gold-plated RCA, gold-plated external socket and high-precision parts.
Package List:
-1 x Amplifier
-1 x USB Cable
-1 x Manual
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Jan-08-21 at 23:59:14 PST, seller added the following information:
