************IMPORTANT*************
The
tabs on the connector are on the outside edges of the connector as can
be seen in the photos. Please make sure that your 4 pin connector will
fit this configuration before purchasing. Thank you.
********IMPORTANT INFORMATION*************
The easiest and best way to get way more info than you could possibly consume, follow below directions.
1. Go to web site: www.equipment-coolingfans.com
2. On the left side under products, click on " Computer Case Cooling Fans "
3. Scroll down to the 9th fan on the page. ( CPU DC Ball Bearing Brushless Cooling Fans )
THE BASICS
The Model Number is MX8025ABH1
12VDC 3500 RPM 50.35 CFM Noise-36 DB-A Water Proof, Damp Proof 80mm x 80mm x 25mm
4 Pin Connector
These fans were originally sent to PicoBrew so they must have been installing them in their Home Beer Brewers.
Most
of these fans have the Model Number sticker wrapped around the wires
but there are a few without labels, no big deal. The fans themselves do
not have any markings on them at all. I just Googled the model # and the
manufacturer's web site came up. Shenzhen Topfan Technology Development
Co. Ltd.
I
tested one of the fans and they appear to be of good quality and they
move a good amount of air without creating a lot of noise.
*************CHECK OUT MY STORE FOR ANOTHER CHOICE IN AN 80MM FAN WHICH IS BASICALLY THE SAME BUT IS 4,000 RPM AND THE MFG. IS ADDA.************