|
Click on an image to enlarge it |
Known from well-known car manufacturers, the technology of the sequential blinker (so-called. Running light effects) now also developed for two-wheelers.
The indicators offered are E-Mark and can therefore be used legally in road traffic without TÜV registration. Simply replace the original indicators and drive off (please note the note at the end of the item description). The indicators are made of black plastic and the indicator glass is made of clear glass. As a special highlight, the rear has been redesigned to be extremely aerodynamic with a rib structure. For an improved hold and vibration reduction, the indicator is rubber-mounted on the mounting arm.
Thanks to these LED indicators, with a so-called running light effect, your motorcycle becomes an absolute eye-catcher even in the dark. They not only upgrade your vehicle visually, but also increase your safety, because the sequential LED indicators (so-called. Running effect) are more eye-catching for other road users due to the special flashing frequency and the brighter LED luminosity. 30 LEDs ensure the optimal luminosity!
A pair consisting of 2 indicators is sold.
Figure 1 shows only an example of the sequential flashing frequency!
Installation advice:
Thread: M8
- Thread length: approx. 20 mm (2 cm)
- Cable length approx. 25 cm
- The connection is made via two cables: indicator + (yellow) / indicator earth - (black)
Note: LED indicators require less power than standard filament indicators. It is possible that the original relay has to be replaced by a load-independent LED relay. If the LED indicators should light up too quickly or permanently after installation, the original relay must be subsequently replaced with an LED relay.
Here you will find the matching LED indicator relays (just enter the article number in the eBay search!):
3 pin universal motorcycle / scooter flasher relay: 283347373821
- 2 pin universal motorcycle / scooter flasher relay: 27366092284
|