Pumps de direction CITROEN C4 / DS4 


PEUGEOT ELECTRIC PUMP

ELECTRO-HYDRAULIC STERN CITROEN C4 PICASSO / DS5


Références fabriquantsJ5101477
G5101477
A5101477
Références constructeurs9676772980
Références rénovateursCSP70310GS
DSP2386
Véhicules concernésCITROËN C4 Picasso 
CITROËN DS5
1.6 HDi (DV6C) - 1.6 HDi 115 FAP (DV6FC)
1.6 HDi 120 FAP (DV6FC) - 1.6 THP 16v 150 (EP6CDT MD)
1.6 THP 16v 156 - 1.6 THP 16v 163 (EP6CDT M)
1.6 THP 16v 163 (EP6CDT) - 1.6 THP 16v 200
2.0 HDi 135 FAP (DW10FD 100 KW) - 2.0 HDi 136 (DW10CB FAP DTR)
2.0 HDi 150 FAP (DW10FD) - 2.0 HDi 163 FAP (DW10CTED4)
2.0 HDi 180 FAP (DW10FC) - Injection EP6FDTX


FOR ANY QUESTIONS PLEASE CALL 

CELL: 368577090

THE COLLECTION OF YOUR OLD NON-WORKING PIECE IS INCLUDED IN THE PRICE

A highly specialized team in completely regenerating electric power steering and electro-hydraulic pumps of every brand and model, providing ONE YEAR WARRANTY.

Regeneration complete with groups electric power steering of every make and model 1 YEARS warranty.

There Raim Elettromeccanica is able to offer the complete regeneration service, to be understood therefore both of the mechanical parts and of the electronic ones (control unit, sensor and motor), of all the columns equipped with EPS (Electrically Powered Steering - electric power steering).

This type of intervention is carried out by ordering the Raim Elettromeccanica an item already regenerated (if available) and returning subsequently the defective one. The return (column-EPS group / ELECTRO-HYDRAULIC PUMP), where applicable, must be delivered to the Company no later than 15 (fifteen) days and in recoverable condition, i.e. not rusty and complete as supplied: in the absence of these conditions or in the event of failure to return, a cost will be charged which will be calculated from time to time based on the model in object.

The Company also sells non-regenerated but new items (coming from stock - therefore original - or from other manufacture) for which, therefore, the recovery of the defective return is not foreseen (for more detailed information, consult our technician at 368577090).

For internal organization and product warranty, the Raim Elettromeccanica provides the entire regenerated item rather than the individual items parts affected by the defect (eg. control unit, motor, torque sensor), recognizing one one year warranty starting from the date of billing, both on refurbished and new items (for further details see Warranty Terms).

Warranty terms

On all the parts we have regenerated, the sector manager will put a stamp showing the revision date; the stamped date on the carcass will have value during the warranty period which will expire without fail at the end of the twelfth month.

The lack of the hallmark or the forgery of the date will not give the right to any warranty period; will be recognized in warranty for defective goods in details or in manufacturing processes at our sole discretion ex our warehouse.

The guarantee will only materialize in the replacement of the parts recognized by us as defective: any possible ones will not be recognized costs of detachment and refitting, consumables and any consequential damage.

Electrohydraulic - electronic - electromechanical units are rather complicated and fragile, therefore in order to avoid any damage

Our technicians are at your complete disposal, paying attention to the following assembly operations:

• Do not carry out any welding on the vehicle without disconnecting the battery;

• Do not make electrical bridges with one or more batteries causing excessive current surges;

• Do not wash or wet the electronic units with water or other liquids;

• Avoid any contact of the electric groups with mud or earth;

• In case of defective groups whose cause is due to an inadequate acknowledgment of the aforementioned contraindications, it will not come no warranty claims accepted.

What does regeneration consist of:

The regeneration of the electric power steering units (EPS - Electrally Power Steering) includes:

• The complete disassembly of the group;

• Pickling and electrolytic galvanizing of metal parts;

• Overhaul / replacement of bearings;

• Verification of any eccentricity of the internal shaft;

• The calibration of the play of the cardan joints and of the couplings between telescopic axles;

• The calibration of the play of the pin-rack coupling of the servomechanism;

• The replacement of the engine column torque position sensor;

• Overhaul / replacement of the servomechanism drive motor;

• The overhaul / replacement of the elastic coupling for keying the electric motor to the servomechanism;

• The overhaul / replacement of the electronic control unit;

• The replacement of any damaged plastic parts (adjustment lever, brackets, couplings, ..);

• Verification of the integrity of all wiring and connections;

• Greasing of bearings, cardan joints, elastic coupling and servomechanism;

• Testing and calibration on a test bench;

• The centering / alignment of the steering and the prevention of any rotations with an appropriate locking system;

• The protection of the threaded parts with specific rubber protections.

 

WITH EXPRESS COURIER 24h!

 

5 stars 24 / 48h
1 star 6-7 days.

---------- ATTENTION!
-

Don't miss this AMAZING OPPORTUNITY!


All of our products are regularly and strictly billed new.

 

 

WE ACCEPT AS PAYMENT METHODS:

  • PAY-PAL PAYMENTS
  • OTHER.

DON'T MISS THIS OPPORTUNITY ......
HAPPY PURCHASE TO ALL ...

 

This listing was made with eDock.
This type of intervention is carried out by ordering the Raim Elettromeccanica an item already regenerated (if available) and returning subsequently the defective one. The return (column-EPS group / ELECTRO-HYDRAULIC PUMP), where applicable, must be delivered to the Company no later than 15 (fifteen) days and in recoverable condition, i.e. not rusty and complete as supplied: in the absence of these conditions or in the event of failure to return, a cost will be charged which will be calculated from time to time based on the model in object. For internal organization and product warranty, the Raim Elettromeccanica provides the entire regenerated item rather than the individual items parts affected by the defect (eg. control unit, motor, torque sensor), recognizing one one year warranty star