Specification:

1) Panel Installation
2) Wide range temp control
3) Cooling/heating control
3) On/off
4) Support Calibration
5) Support High Temp Alarm
6) Lock data

Can select cooling or heating working mode.

Set highest/lowest upper limit temp to avoid accident.

Temp correction,you can calibrate temp according to requirement.Temp(after)=temp(before)+ correction value.

Delay start to protect your device.

Turn on/off button tone.

High temp alarm,when measure temp reach to the setting temp,controller will alarm.

Restore factory settings,when the setting value is confusion, please restore factory settings.

Hysteresis setting,for example,environment temp is 30℃ and it is cooling mode, the setting temp is 25℃,the hysteresis setting temp is 2℃, cooling reach to
25℃ the relay off, and when temp is over 27℃ ,the relay on and cooler start, the 2℃ hysteresis keep is between 25℃ to 27℃.

Parameter:

Control temp range:-50-110℃

Power requirement: AC 100~240V

Resolution: 0.1℃ in the range of -9.9-99.9℃, 1℃ in other temperature ranges

Measuring input: NTC(10k 0.5%) waterproof sensor 0.5 meter cable

Relay output:1 way,rated current: 10A.

Control accuracy: 0.1℃

Hysteresis accuracy: 0.1℃

Controller Size: 48x40mm, temp sensor cable length: 0.5m.

Refresh time:0.5 seconds

Power consumption: Standby current<=35MA, Action current:<=65MA

Temperature protection: 0-110℃

Environmental requirement:-10-60℃, humidity:20-85%

 

Connect AC power and the load.

Set the desires temp:

1,press the SET button,the display flashes the temperature.

2,Press +- button to change the temperature number.

3,Press SET to save and exit after setting successfully.or no operation 10s,temp save and exit.

 

Change the default setting.

Press "Set" about 5 seconds---> up or down ---> "Ent" to confirm.

 

Package Include:

Temp controller x 1 (AC 100v~240v Blue version)

We also have Red version in our store.

 

 

Installing reference: