![]() | 3.5-6.3 Adapter Used with the 3.5-3.5 cable to connect the 6.3mm sync port on the receiver to the studio light |
Connecting a flash to the FT-8 Receiver hot shoe 1.Turn off the flash and the FT-8 receiver. 2.Slide the flash into the receiver's hot shoe mount . 3.Lock the flash with the flash's locking mechanism. 4.Turn on the flash and the FT-8 receiver. 5.Set the flash to Manual mode. | ![]() |
![]() | Connecting a flash/strobe to the FT-8 receiver by sync cable 1.turn off the flash/strobe and the FT-8 receiver. 2.Connect a cable to the receiver's 3.5mm Sync Port. 3.Connect the opposite end of the cable to a flash or studio strobe(a 6.3mm adapter is included for studio strodes with larger ports). 4.Set the flash/strobe to Manual mode. |
Dimensions: Transmitter: 1.4 x 2.0 x 4.1" (3.5 x 5.0 x 10.4 cm), Receiver: 1.5 x 2.0 x 3.5" (4.0 x 5.0 x 8.8 cm) | ![]() |
![]() | Setting Channel: 1. The FT-8 has eight channel settings. 2. Press the Channel Adjustment Buttons(left or right)on the transmitter or receiver to set the channel . 3. Channel Numbers 1-8 will illuminate on the transmitter or receiver to indicate which channel the device is set to . 4. FT-8 Transmitters will only trigger receivers set to the same channel. Fire All Channels Switch:1. To Fire all flashes or strobes on receivers set to different channels press the Fire All Button on the transmitter. 2. The Channel Numbers 1 to 8 will illuminate. 3. All nearby FT-8 receivers set to any channel in standby mode will fire the connected flashes/strobes. 4. To turn off Fire All mode press the Fire All Button .The channel selection will revert to its previous setting. |
Package include: Transmitter x 1, Receiver x 1, 3.5 to 3.5mm sync cable x 1, 3.5mm to PC plug cable x 1, 1/4" mono plug socket x 1, Lanyards x2, Carrying pouch x 1. | ![]() |