This listing is for a BRAND NEW Whipple Intercooled Stage 2 Supercharger System with the revolutionary Gen 6 3.0L blower setup for the 2024+ Ford Mustang GT 5.0L which will get you an astounding 825* flywheel HP and 640* foot pounds of torque on 93-octane gas!

While Whipple broke many rules and records with its record setting S550 supercharger system, holding the title of the most powerful, most advanced supercharger system available, we weren't satisfied and decided to build an all new supercharger from the ground up for the 2024 S650. The new, direct and port injected supercharger system features the brand new Generation 6 3.0L front feed twin-screw supercharger with all new bearings, gears, rotors and housing allow the new supercharger to spin faster, longer and safer while producing more power than any other positive displacement supercharger ever built. The Stage 2 kit comes with everything in Stage 1 along with a larger 112mm throttle body, high flow fuel pump, more boost and a 300 rpm higher redline!

the all-new Gen 6 blower! This updated blower features a revamped rotor package and port design, specifically engineered to lower temperatures and enhance airflow across the entire RPM curve. With these improvements, you can expect an increase of 25-40HP+ compared to the Gen 5 Blower, while maintaining identical boost levels on 91 Octane!

This system is 100% complete, including Whipple's Gen 6 3.0L supercharger, high-flow fuel injectors, high flow 400LPH fuel pump, oversized heat exchanger, a tomahawk flash tool with a unique PCM calibration, and all the pre-formed & fitted hoses with all the necessary wiring connectors for a easy installation. The calibration is for stock vehicles or those with a catback only, just bolt on and drive!

Currently in Pre-sale, shipment expected in late 2023.

Whipple Part # WK-2640-STG2-30

There are many different options available from Whipple, please view the details section below for the details on this kit. Please contact us with questions or check our eBay Store for the many other Whipple Supercharger kits available, and options such as upgrading air inlet or polished head units.

WHAT TO EXPECT FROM THIS PRODUCT:

These supercharger kits are the most complete available, including everything needed for installation. This includes all mounting brackets for the blower, pullies, belts, intercooler, all the tubing, piping, fittings and clamps and even oil for the self contained lubricating system. You do not need to make any major modifications or purchase special tools or other parts. Many customers install in their garage or driveway over a weekend.

Specifications:
Horsepower: 825+
Results may vary depending conditions, dyno, octane and vehicle modifications. 91 octane will always result in lower power than 93.
Gen 6 W185RF 3.0L supercharger head unit, 10-11 psi, upgrades available
Highly effective air-to-water intercooler
Fuel Pump Supplied: High flow Deatschwerks 400LPH Fuel Pump Supplied
Fuel Injectors Supplied: Deatschwerks 72 lb/hr Dual Pattern Fuel Injectors
Computer/Ignition Mods.: Tomahawk Flash Tool Supplied
112mm Billet Throttle Body included with the Stage 2 Kit
The most power per pound of boost on the market!
Easy and quick installation
System is 100% complete with OEM quality and appearance
All New, High-Efficiency 120mm Rotors
All new Bearing Plate
Dual Air Boxes & Dual Filters mated to a single Throttle Body
Complete With All Necessary Parts & Hardware For Installation
No Internal Modifications Required
CARB EO PENDING

TREperformance is an Authorized Installing Dealer of Whipple Superchargers.

With years of OEM and racing experience, Whipple engineers have developed a unique PCM calibration that reconfigures all the necessary engine functions including fuel, spark, knock detection, torque management, transmission control and electronic throttle control. The vehicles PCM constantly monitors the engines torque output while monitoring many different parameters to keep the engine in it’s ideal parameters. If a parameter falls below specification, the PCM will lower boost and torque output until the problem can be cured. No other calibration in the field has such technology, giving the Whipple SC system unheralded performance and reliability. Each Whipple kit comes with unique software and a OBDII flash tool giving the customer the ability to flash/update whenever needed. Each customer also gets the new Flight Control Software, ability to adjust wheel/axle size, octane adjustment, crank/cam relearn and many other unique features.

Each complete Whipple system comes with the IAT2 harness and sensor to properly monitor the delta between the incoming air and the compressed air after the intercoolers, this helps maximize power in all given environments. The 6-rib billet idler system features a billet spring loaded tensioner, billet idler pulleys and lightweight pocketed supercharger pulley. The 6-rib can easily be upgraded to a 10-rib with the optional 10-rib system. Each system comes with an adjustable idler pulley to allow variance in SC pulleys with minimal belt length changes. The massive air inlet allows for nearly any throttle body to be run, 80mm stock, 92mm, or 112mm throttle bodies.

The Whipple Advantage
The Whipple Advantage is designed into every Whipple SC system. This advantage is broken down into 5 categories during the design and testing phases which truly sets Whipple apart from others:

1. Best power for money.
2. Most complete package.
3. Maximum power.
4. Maximum power expandability.
5. Aesthetic appeal.

What does this mean? You get it all, in one package. Massive power gains with the biggest superchargers, biggest intercoolers, biggest intercooler systems, biggest air-inlet systems while providing robust belt systems and heavy-duty spring tensioners. The intake manifold is designed with high velocity in mind, while increasing plenum volume to lower pressure loss at high power applications.

You then get OEM style fuel and vacuum hoses with nylon sheaving for added protection and appeal, OEM style quick connect fittings with billet aluminum fittings. No ugly brass fittings hanging off the inlet like some others. Wire extensions are injection molded to allow simple plug-and-play installations. Each system also has multiple options for increased performance such as oversized heat-exchangers with dual fans, billet high flow throttle bodies, oversized cold air intake systems just to name a few.

Each kit comes with step-by-step instruction manuals printed in color to help all installers, including the do-it-yourselfer. Kits come with all the fasteners, all color matched for proper aesthetic appeal.

So don’t be fooled by others, there is no comparing to the Whipple supercharger systems, simply the top of the line packages designed and built to exceed all expectations.

Whipple's Superior Engineering
A Legacy Reimagined:
Building on our race-winning, record-setting 5th generation supercharger's prowess, we've pushed boundaries further than ever. Welcome to the 6th generation - a testament to relentless innovation and engineering genius. Dive deep into our groundbreaking Whipple rotor profile and the revolutionary port shape. These advances aren't just tweaks; they are leaps, drastically enhancing supercharger efficiency and rewriting the rules of performance. The 6th Generation Whipple Supercharger isn't merely an upgrade. It's a paradigm shift, transforming every journey into a thrilling adventure and every road into a racetrack.

Supercharger Your Thrills:
With the 2024 Ford Mustang 5.0L S650 and the all-new Gen 6 Whipple twin-screw supercharger, driving becomes a pulse-quickening, immersive experience. Feel the adrenaline, hear the roar, and know the unparalleled joy.

Stay Cool, Revel in the Rush:
Beyond sheer power lies our secret weapon: the industry-leading, patented dual intercooler core with dual pass technology. It doesn't just cool the air once – it cools it twice, ensuring optimal performance while your Mustang remains unfazed and composed under intense pressure. Combine this cooling mastery with tire-shredding horsepower and torque, and you've got a ride that's both thrilling and dependable.

OEM-Level Calibration, Seamless Joy:
Melding raw power with refined precision, our OEM-level calibration offers a harmonious blend of excitement and reliability in every driving scenario

Engineering the future, one rev at a time. With Whipple, embrace the thrill, respect the legacy. Always drive responsibly and adhere to road regulations.

Whipple Fuel System
The Whipple S650 Mustang system uses Bosch 55lb/hr fuel injectors and billet fuel rails, Every fuel line and rubber hose is emissions compliant and features quick connect style for simple installation. Each injector is pre-tested and flow matched. No other fuel system mods are required.

Full System Specifications:
Largest intercooler system on the market
Billet 112mm high flow throttle pre-set with factory electronics
No other upgrades required, just massive power right out of the box
Front entry Gen 6 W185ax (3.0 liters/3000cc) Whipple twin-screw supercharger that significantly outperforms competitions 2.3L and 2.65L roots-type systems
Gen 6 supercharger features new 120mm rotors for increased RPM capacity, large diameter for increased airflow and small leak path, increased helix for optimal sealing
3.0L is 13% larger than 2.65L roots-type allowing lower power draw and lower discharge temps to flow the same amount of air (more power to the rear wheels)
Oversized Crusher air inlet for maximum airflow capacity and minimal rotor cavitation
Inverted design allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas
Massive air-to-water aluminum bar-plate intercoolers (over 55% larger than some competition) offer more cooling than any other positive displacement system available, nothing comes close
High flow intercooler pump, nearly double the flow of the standard units others use
Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy
Included OBDII flash tool, new Tomahawk flash tool with the new Flight Control technology
Tomahawk allows wheel/tire axle changes (a Whipple exclusive)
72 lb/hr fuel injectors vs stock 17lb/hr stock injectors
More boost at the "hit" than any other twin-screw
Flat torque curve for incredible acceleration
High flow fuel pump replaces stock pump
Oversized heat exchanger for incredible intercooler water temps, 150% more volume than competition, standard with every kit
Fits under factory hood with no modifications
No cutting or grinding on the engine block
No cutting or grinding the K-brace
No internal modifications required
Kits come complete with all necessary parts and hardware for installation
Plug and play wiring with male and female connections
Proven 6-rib belt system with heavy duty spring loaded tensioner and adjustable idler system
Optional 10-rib belt system with matching 6061 T6 billet pulleys
OEM quick connect fittings for easy installation
Complete kits and competition kits are available
Available in wrinkle black, polish, Ford textured blue or any custom color
Instant boost at the touch of the throttle
3 minute pulley changes
Easy belt changes
Lightweight pocketed 6061 T6 billet aluminum SC pulley
Iridium spark plugs included

We have Whipple supercharger systems to fit almost every performance application!
Check out our eBay Store or click the "Contact seller" link next to our user name at the very top of the page to get our phone number.

-IN STOCK ITEMS- Ship no later than the second business day after receiving cleared payment.
Pay by 12pm PST and most orders will have SAME DAY SHIPPING!
Due to PayPal and Credit Card policies any item or combination of items valued over $250 requires a signature for delivery.
All items paid with PayPal must ship to the address in the shipping address field in your payment details as required by PayPal.
If there are any issues fulfilling your order we will contact you and offer a full refund if there will be more than 5 days until shipping.
Any item paid for with an echeck through PayPal will not ship until the money clears, typically 3-5 business days.
We observe all major holidays; please contact us before bidding if you are unsure of when your item will ship.

Domestic Shipping Options (Please note that day one is the day after the item ships):

-UPS Ground- 1-7 days. Check at www.ups.com for your location.
-USPS Priority Mail- 1-4 days but no detailed tracking with this service.
-USPS Express Mail- 1-3 days and more detailed tracking than priority.
-UPS Next Day Guaranteed- Order by 12pm Pacific Time to ship the same day for next day guaranteed delivery!
UPS Ground and USPS Priority Mail do not have a guaranteed shipping timeframe. If you need your item ASAP in a guaranteed number of days we highly recommend upgrading to USPS Express Mail or UPS Next Day.

International Shipping Services:

-USPS Priority Mail- 6-10 days typical delivery time, but as long as one month on rare occasions. BUYER BEWARE - NO TRACKING with this service.
-USPS Express Mail- HIGHLY RECOMMENDED 3-5 days typical delivery time with tracking, but as long as 2-3 weeks on rare occasions.
-USPS Global Express Guaranteed- 1-3 days GUARANTEED! (Most Countries, check USPS.com)
If available, this shipping service is listed in eBay auctions as "Expedited Int'l Flat Rate Shipping"
Since USPS Priority Mail International does not have tracking we strongly recommend upgrading international shipping to USPS Express Mail or to USPS Global Express Guaranteed.

International Information:

We will ship any part from any auction to anywhere in the world!
All customs fees are paid by the receiver.
Please research your customs fees with your local government before ordering so you know what to expect to pay once the shipment arrives.
We do not lower invoice values since it is a violation of US and International custom laws.
All international shipments are shipped with the correct value for the parts shipped.

Credit card payments can be made by directly calling, use the "Contact seller" link next to our user name at the very top of the page to get our phone number.

Due to new eBay policies, sellers are no longer allowed to accept any other method of payment for eBay items besides credit card, debit card or paypal.
This means that TREperformance is not allowed to accept other payment methods for any item purchased through eBay.
It is always acceptable to visit our store in person to make payment and pickup your item at:

TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627

  

• Policies

RETURNS AND EXCHANGES:
We accept returns of unused, uninstalled, brand new goods, but we must charge a restocking fee of 20% to cover the costs we incur from eBay, Paypal, shipping, labor, etc. We also must charge a 20% restocking fee on any order which is cancelled after payment has been received, even if that order has not shipped. This is also to help cover the fees associated with eBay, PayPal, order processing, restocking, etc. If you would like to return or exchange an item please email us with your paypal or authorize.net transaction id # and the reason for the return or exchange.
No returns are accepted without an RMA number which is given to the customer by TREperformance via email. Always have the RMA number clearly written on multiple sides of the package when you return the item. If it is not clearly written on multiple sides of the box it may be returned to sender. All returns must be received within 30 days of purchase.

ACCEPTANCE OF TERMS:
Your bid is a contract! By clicking upon "Place Bid" or "Buy It Now" or "Make Offer" the Buyer acknowledges that this action shall be treated as a legally binding "electronic signature," as this term is defined under federal law in the Electronic Signatures in Global and National Commerce Act of 2000. Buyer also acknowledges that he/she has read this web-page, as well as eBay's "Rules for Buyers" in there entirety, and has unconditionally accepted all terms included therein. Buyer also thereby warrants that he/she has any applicable legal authority to purchase this equipment, and that he/she will not use, sell, or otherwise distribute this item in any manner in violation of applicable state and federal laws. Buyer also agrees to indemnify and hold harmless TREperformance for liability from any and all claims arising out of Buyer's use, sale, or other distribution of this item. No refunds will be given unless the buyer receives prior written approval from TREperformance, and no repairs will be provided, nor labor charges covered by TREperformance in any situation. Seller reserves the right not to sell to bidders with excessive negative or "0" feedback.

Contact info:
Email Anytime
Call us by clicking the "Contact seller" link next to our user name at the very top of the page to get our phone number
Phone and Storefront Hours: Monday - Friday 8:00 AM - 4:00 PM PST

Mailing, Shipping & Storefront Address:

TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627