You’re bidding on total of 3 Ludwig Hunger Brake servicing machines machines. Two F308 /G-CE and one S 331-CE. The units work as great as they look. This stuff is made from Germany. Would be perfect for a shop owner who appreciates high end tech.
1. S 331-CE Brake Shoe Grinder
The S 331 belt grinding machine is ideal for cleaning and derusting brake shoes.
Uneven corrosion and oxidation deposits as well as adhesive residues are removed from old brake shoes by grinding. Cleaning of the brake shoe surface after removal of the old linings is essential for a secure platform and vibration free seating of the new lining.
The dust extractor (accessory) with pre-separator provides a clean work- ing environment. Grinding sparks are extinguished in a pre-separator before they reach the dust extractor.
The abrasive belt can be replaced easily.
Brake shoes up to a width of 270 mm (10“-shoes) can be machined.
HIGHLIGHTS
USEFUL FOR
Description
The S 331 brake shoe grinder with grinding roll is a low priced but high effective machine for cleaning and derusting brake shoes. Uneven corrosion and oxidation deposits as well as adhesive residues are removed from old brake shoes by grinding. Cleaning of the brake shoe surface after removal of the old linings is essential for a secure platform and vibration free seating of the new lining.
Technical Data
Electrical equipment |
|
Power total |
0,75 kW |
Voltage |
230 V |
Power and Frequency: |
Single phase / 50 Hz |
Supply protection |
16 A |
Type of protection |
IP 54 |
Band without end |
|
Speed of cylinder |
18 m/s |
Dimensions |
130 mm |
Length |
270 mm |
Grain for steel |
grain 36 |
Dimensions et weights W x L x H |
600 x 500 x 1050 mm |
Place necessary Machine and place for work |
1,0 x 1,0 m |
Weight Machine with accessory - standard, with package |
about 80 kg |
Noise level |
The noise level at maximum flow and at full load measured in accordance with standard DIN EN 31201 at a distance of 1 m from the machine surface in open space amounted to 84 dB(A) at the working position. |
2. F308 /G-CE Version Brake lining turning machine
HIGHLIGHTS
USEFUL FOR
Description:
The profiling of brake linings in position, i.e. on the axle, guarantees safe braking values from the outset. Furthermore, the linings make contact over their full working surface. Overloading and consequent over-heating caused by partial contact is eliminated and both brake lining and brake drum life extended.
Technical Data
Capacity |
|
Maximum turning |
Ø 470 mm |
Minimum turning |
Ø 230 mm |
Maximum turning length |
270 mm |
Maximum depth of cut |
3 mm |
Lifting range of standard lifting and mounting trolley |
510 - 700 mm |
Speed of rotation and feed |
|
Speed of rotation |
100 rpm |
Feed |
0,60 mm/rev. |
Electrical equipment |
|
Power of motor |
0,37 kW |
Type of current and frequency |
3 phase, 50 Hz |
Voltage |
400 V (230V) |
Power supply fuse rating |
16 A |
Type of enclosure |
IP 54 |
Dimensions and weight |
|
L x W x H (incl. guard) |
1200 x 800 x 1100 mm |
Space required Machine + working area |
1,5 x 1,5 m |
Weight Machine with standard accessories and packing |
230 kg approx. |
Dust collection |
|
Minimum flow |
170 m3/h |
Suction trunking |
Ø 32 mm |
Noise level |
The noise level at maximum flow and at full load measured in accordance with standard DIN EN 31201 at a distance of 1 m from the machine surface in open space amounted to 74 dB(A) at the working position. |
Electrical connection |
A 5 core cable approx. 1,5 m long is fitted to the machine. A customary 5 pin power plug has to be fitted to the end of the cable. The supply voltage quoted on the name plate and the regulations of the electricity supply company must be observed. The motor protection circuit breaker fitted trips if the voltage is too low as well as if the motor is subjected to overcurrent. |
Direction of rotation |
The machine has a direction of rotation selector switch. The brake linings are always turned in the same direction as the wheel rotation. Right vehicle side: clockwise Left vehicle side: counter clockwise The above data is subject to change without notice. |
Shipping:
This is a large item therefore will need to be shipped by freight. All our equipment is sold as local pickups however, if you provide us ample time (2 weeks), we can help with shipping. US buyers will need a customs broker (we can recommend one and help in the process) and might be subject to paying an import tax. Please provide us with your address and we can work out a shipping quote from our freight service providers. Please research the item you buy as we offer no support or return for large equipment. You’re welcome to come see the item you're interested in.