Stronger than Steel
Stronger than Kevlar
Highly resistive to abrasion

If you break the cord on this pull start, (through normal use) I will replace the complete pull start - Free of charge! Thats how confident I am that this is the best ever pull start cord.

Only Available from RCScrapyard!

Even Better than our very popular Kevlar cord pull start,  this new mix of cord material has a breaking strain of 580lb, and is composed of strands coated in a material similar to Teflon, to avoid Fraying.

We have taken our budget universal Nitro Pull Start, and rewound it with this new, ultra high strength, guaranteed unsnappable cord, making it almost unbreakable. This is especially good for high compression or 1/8th engines, but will fit most engines. A full list of known compatible engines is below. Nitro RC pull start, comes complete with fixing screws and new one way bearing.

Measurements

12mm Hex one way bearing fitting (M12 Socket Size - Measured across the flats).

32mm Length (across backplate)

32mm High (across backplate)

27mm between fixing hole centres. Measured both vertically and horizontally

19mm Depth / Width 

Bearing fits any 6mm diameter starter shaft (most engines)

The screws supplied will suit many engines. they may need to be cut to size.

From my experience this pull start will fit the following engines. it may also fit others.

VX Engines - .12, .15 and .18
Acme and Infinity engines
Thunder Tiger GP15 and 21Pro ProBX
HPI Engines (Not T-15 engines)
XTM .18 Engine
Tamiya Engine with a Blue cylinder head (not the older silver head versions)
Traxxas TRX 2.5
Ansmann .15 and .21
Mach 427
Force Engines
and many more..........

If your engine is not listed here or your backplate is a different size you may benefit from our Universal Pull Start repair kit, which contains everything you need to repair any Nitro Pull Start. Ebay Item Number is 283876748428

If in doubt - please ask me.

Buy With Confidence :-
I have been involved with Radio Control models for many years, and have built up a wealth of knowledge on many Nitro vehicles, both old and new. 
Please review my feedback for customers comments.

Many parts are interchangeable between models. I have a stockpile of spares both new and used for all makes and models of Nitro RC Vehicles, some of which are not yet listed, so if you are looking for something specific, please ask.

I also fully refurbish Nitro RC models for resale, so if you are looking for a used but reliable Car /Truck or Buggy, these are listed on a weekly basis.

Note:-
Packaged new items are sold on a 30 day return basis, and returns will be accepted provided the packaging is unopened.  
Used or second hand spares are sold as seen, and are non returnable unless by prior arrangement.

I would ask the buyer to please pay within one hour of purchase. If this is not possible please contact me. All items are sent via Royal Mail or Insured courier service.

 Please feel free to ask any questions, I will endeavor to answer them promptly both before and after the sale.