Package Include:
1PC 3FTx1.25Inch Metallic Heat Shield Sleeve
Custom Service:
If you need more sizes Or need bulk order, please contact us via eBay message in advance, Thank you.
Length Available: 3Ft, 6Ft
Diameter Available: 0.78(3/4)inch / 20mm, 1.00inch / 25mm,1.25inch / 30mm
Introduction:
Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables, and hoses, simply wrap Heat Shroud around whatever needs protection and close edges.
Aluminized Heat Sheaths/tubes have a reflective aluminum layer on one side and heat blanketing material on the other. They are hand sewn together right here in China. They come in a range of sizes from 1/2 inch up to 3" in diameter They can be used on braided steel lines, oil lines, plastic tubing, wire harnesses, air Intake or Intercooler Pipe, etc... Anything you want to protect from radiant heat. They can handle 800 degrees direct all the way up to 2000 degrees radiant.
Feature:
The sleeve outside reflective gold film combined with the insulating fiberglass interior, protects delicate wire bundles, cables, and lines from damage caused by nearby exhaust pipes, headers or other heat generating components.
Spark Plug Wire Protector
Size: 3 feet length x 5.18" width Diameter:1.25inch/30MM
Color: Silver, Black
Heat Rating: up to 2000 degrees radiant
Convenient hook & loop designed edges
Withstands 500°F direct continuous/2000°F radiant heat
No need to remove wires and hoses
Easily trimmed to length
Application:
The sleeve is designed to easily slip over wire and hoses and the attractive seamless construction provides full coverage and protection. Easily cut with scissors.
Available in multiple lengths and diameters to fit: wiring, fuel lines, brake lines, intake tubes, pipes, spark plug wires, battery cables, A/C hoses, and more.
Note:
Not recommended for use on or against headers, exhaust pipes or extremely hot surfaces (The melting point of the Velcro fastener is about 325Fo) Can be used in about 90% of the underhood area when installed.
No Installation Guides Are Included, We Highly Recommend To Seek Professional Installation
For any inquiries or special requests such as larger amount ordering please write to us.