NOT COMPATIBLE FOR HALOGEN HEADLIGHTS WITH H7 BULBS FOR MAIN BEAM!!!
63117316217 TMS Driver Module is used with AHL Dynamic headlamps.
63117304905 AHL Headlight Module is responsible for controling Angel Eyes (Halo Rings) and light movement.
Please double check provided BMW part numbers to make sure it is correct part for your vehicle.
Each headlight takes 1 piece of these 63117305235 TMS modules.
OEM Part Number
63117329157 - 7329157
63117316217 - 7316217
63117305235 - 7305235
63117304905 - 7304905
63117279625 - 7279625
63117274400 - 7274400
63117267044 - 7267044
63117316208 - 7316208
63117269531, 7269531
Lear part numbers:
535211807, 8995106
Fit For the Following Models
BMW 5 Series F10 Pre-Facelift 2010, 2011, 2012, 2013
BMW 5 Series F11 Pre-Facelift 2010, 2011, 2012, 2013
BMW 5 Series F07 GT Gran Turismo Pre-Facelift 2008, 2009, 2010, 2011, 2012, 2013
The HID ballast is important as it makes it easier to start the lamp and allows the current flow through the entire bulb, keeping the light on. Another important function is to control the electrical current flowing through the bulb.
HID bulbs (High Intensity Discharge) are connected to ballasts that control the voltage and frequency of the current to ensure the lamp gets the correct power. Ballasts are usually attached to the rear or bottom of the headlight.
Each ballast has an operating environment temperature range and UL location classification. If it is too hot or too cold, the ballast can burn or not start the lamps at all. Heat combined with prolonged condensation in an electronic ballast can cause corrosion.
How to replace the ballasts:
Turn off the device on the circuit breaker.
Cut the wires near the old ballast and remove the ballast.
The wires of the new ballast are excessively cut.
The new ballast and the ends of the sockets are removed.
The new ballasts are connected to the cables in the socket with cable connectors.
-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.
- Store items in our UK and DE warehouses ensuring the accurate and on-time delivery of your orders. We welcome European buyers.
-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of auction closing.
-Our warranty is valid for max. 24 months without mileage limitation.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.
NOT COMPATIBLE FOR HALOGEN HEADLIGHTS WITH H7 BULBS FOR MAIN BEAM!!!
63117316217 TMS Driver Module is used with AHL Dynamic headlamps.
63117304905 AHL Headlight Module is responsible for controling Angel Eyes (Halo Rings) and light movement.
Please double check provided BMW part numbers to make sure it is correct part for your vehicle.
Each headlight takes 1 piece of these 63117305235 TMS modules.
OEM Part Number
63117329157 - 7329157
63117316217 - 7316217
63117305235 - 7305235
63117304905 - 7304905
63117279625 - 7279625
63117274400 - 7274400
63117267044 - 7267044
63117316208 - 7316208
63117269531, 7269531
Lear part numbers:
535211807, 8995106
Fit For the Following Models
BMW 5 Series F10 Pre-Facelift 2010, 2011, 2012, 2013
BMW 5 Series F11 Pre-Facelift 2010, 2011, 2012, 2013
BMW 5 Series F07 GT Gran Turismo Pre-Facelift 2008, 2009, 2010, 2011, 2012, 2013
The HID ballast is important as it makes it easier to start the lamp and allows the current flow through the entire bulb, keeping the light on. Another important function is to control the electrical current flowing through the bulb.
HID bulbs (High Intensity Discharge) are connected to ballasts that control the voltage and frequency of the current to ensure the lamp gets the correct power. Ballasts are usually attached to the rear or bottom of the headlight.
Each ballast has an operating environment temperature range and UL location classification. If it is too hot or too cold, the ballast can burn or not start the lamps at all. Heat combined with prolonged condensation in an electronic ballast can cause corrosion.
How to replace the ballasts:
Turn off the device on the circuit breaker.
Cut the wires near the old ballast and remove the ballast.
The wires of the new ballast are excessively cut.
The new ballast and the ends of the sockets are removed.
The new ballasts are connected to the cables in the socket with cable connectors.
- Store items in our UK and DE warehouses ensuring the accurate and on-time delivery of your orders. We welcome European buyers.
-Please leave us your full name, your telephone number and detailed address when ordering.
-We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay the order.
-We try our best to pack the products as good and safe as possible ,so they always arrive in a good condition.
-We accept PayPal only.
-All major credit cards are accepted through secure payment processor PayPal.
-Payment must be received within 4 business days of auction closing.
-Our warranty is valid for max. 24 months without mileage limitation.
-Once a problem occurs with the purchased product, please do not hesitate to let us know with Ebay messages,we will offer you refund or replacement.