Custom Tramfabriek couplings to replace the standard N gauge couplings of the Kato drives. Will couple with the hoop couplings of 00-9 Peco, Heljan, H0e Minitrains, H0e Egger-Bahn, H0e Jouef, H0e Tillig and other hoop compatible model trains. Uniquely made and sold by Tramfabriek Ltd.

Will fit the following Kato models:

11-103
11-104
11-105
11-106
11-107
11-108
11-109
11-110 
11-030 (bogies/trucks)

It's very easy and fast to swap the coupling.

Content:
Choose from 2 or 10 couplings.

To replace the N gauge couplings:

For the 11-103 and 11-104
Turn the original coupling 90 degrees towards the bottom and it will jump out. Careful if you want to keep the tiny spring, but that is not needed anymore. Fit the new coupling. It is possible you might need to cut the end of the coupling a little shorter if it is too long.

For the 11-105, 11-106 and 11-107
The powered bogie can easily be pulled out and the coupling can be lifted out and replaced. By the non powered bogie, I find it easiest just to bend the coupling downwards to replace it. The bogie doesn't need to be removed.

For the 11-108, 11-109 and 11-110:
Turn the original coupling 90 degrees towards the bottom and it will jump out. Careful if you want to keep the tiny spring, but that is not needed anymore. Cut the pin that was holding the spring. Insert the new coupling and press the box that holds the coupling back onto the model. It is possible you might need to cut the end of the coupling a little shorter.

An original design and sold by:
Sven van der Hart
Tramfabriek Ltd
Eton Wick, England