The new LHR 15 MarkIII is specially designed to deal with various precision situations and forms the new frontier in detailing. Its ergonomic shape allows precise paint correction on curved surfaces and hard-to-reach areas. The LHR 15 MarkIII works faster than the LHR 21 MarkIII. This increased speed ensures the same correction, but the platter diameter and orbit are more conductive on curved and irregular surfaces.
Random orbital motion:
The backing plate moves along the orbit (its amplitude depends on the distance between the axis of rotation of the drive shaft and the central axis of the backing plate) and freely rotates around its own central axis. Under the action of the centrifugal force and the friction force of the compensating movement, the back plate rotates freely at different speeds and in different directions. If the friction causes them to prevent the disc from rotating while the tool is running, the double-acting random orbital motion will become a single orbital motion. The number of revolutions of the disc is variable and does not depend on the number of tracks covered. In terms of efficiency and quality of surface treatment, double-acting random orbital movement currently represents the best compromise.
Improved ergonomics.
The MarkIII's rubber front grip provides excellent operator comfort while ensuring a non-slip surface during operation. The improved rear handle has a rubber surface, which makes the hand more comfortable. Two strategically placed, non-marking tool holders improve tool stability when not in use and provide additional protection against accidental impact. The continued development of MarkIII's BigFoot random orbit platform has solidified its reputation and made it the best.
Electronic speed control panel.
The new electronic speed control dial can easily set the polishing machine to the highest speed without the operator's hands letting go of the machine. The larger dial can be easily adjusted with the thumb. Clearly visible numbers and a more positive response to dial movement make gear changes more deliberate, allowing the operator to choose the ideal speed for the job at hand without interrupting the polishing process.
9 m cable.
The new ultra-long 9m industrial cable is designed to deliver maximum power to the polisher to ensure efficient and safe operation. Longer cables save time, steps and hassle as users don't need extension cords to polish around the car.
Progressive trigger.
The new progressive trigger adds an additional level of control. The progressive trigger is used as a joystick to control speed within the dial range, allowing the operator to make fine adjustments and ensure precise control without having to interrupt the process or reposition the handle to access the dial control.
Design.
Attention to detail is not just an attractive aspect. Every detail, such as the rubber support placed on the main body of the machine, used to stabilize the machine at rest, is the result of extensive research to ensure maximum operator comfort.
Kit including:
1 x LHR15 MKIII / STD Orbital Polisher (Ø125mm - Ø5 ”-15mm Orbit ) (LHR15III)
Ø disc holdermm-in125/5 ″
Ø orbitmm15
PowerWatt500
RPM2000-5000
WeightKg2.6
Speed adjustment•
Thread disc holder plateM8-F
electric cablem9
The backing plate moves along the orbit (its amplitude depends on the distance between the axis of rotation of the drive shaft and the central axis of the backing plate) and freely rotates around its own central axis. Under the action of the centrifugal force and the friction force of the compensating movement, the back plate rotates freely at different speeds and in different directions. If the friction causes them to prevent the disc from rotating while the tool is running, the double-acting random orbital motion will become a single orbital motion. The number of revolutions of the disc is variable and does not depend on the number of tracks covered. In terms of efficiency and quality of surface treatment, double-acting random orbital movement currently represents the best compromise. Th