Total kit volume 925ml
A super soft silicone rubber which has a wide range of uses from
cushioning applications to creating skin effects, other movie special
effects and animatronics.
The two odourless and non-toxic
components mix easily with a simple mixing ratio of 1:1 and because of
the very low viscosity can be used without processing in a vacuum
chamber.
The cured rubber is a translucent beige/off white colour
that is a very flexible, elastic material with high tensional and tear
strength. There is almost no shrinkage (0.1%) and excellent reproduction
of fine detail.. Being an addition/platinum cure rubber it has
excellent dimensional stability and will resist deforming providing a
long library life. As a gel it can remain slightly tacky which could be
an advantage if you need it be non-slip. If you prefer it to be
non-tacky then dust it with talcum powder or corn starch. The silicone
renew powders sold to maintain silicone sex toys is often just corn
starch.
The colour of the cured rubber can be changed with the addition of a colour pigment during the mixing of the two components. We have a range of compatible colour pigments click here
When using this material to cast into a silicone mould a release agent is required click here
It can be softened to your own requirements using this softening additive click here
Can be made thixotropic for applying to vertical surfaces or to over head objects click here
Properties | Units |
Prosthetic |
---|---|---|
Pot Life (25°C) | Minutes
|
20-40
|
Cure Time (25°C) | Hours | 3-5
|
Viscosity (25°C) | Mpa.s | 1500 |
Density (25°C) | g/cm3 | 1.08 |
Hardness | Shore A |
0 |
Linear Shrinkage | % | 0.1 |
Tear Strength | KN/m | 3 |
Elongation at Break | % | 400 |
Tensile Strength | Mpa | 1.5 |
Contact with human skin
Great care must be taken when handling and mixing all addition-cured silicone elastomer systems. All the mixing tools (vessels and spatulas) should be clean and constructed in materials which do not interfere with the curing mechanism. The cure of the rubber can be inhibited by the presence of compounds of nitrogen, sulphur, phosphorus and arsenic; organotin catalysts and PVC stabilisers; epoxy resin catalysts and even contact with materials containing these substances e.g. moulding clays, sulphur vulcanised rubbers, condensation cure silicone rubbers, onion and garlic.
We combine postage however ebay wont calculate the correct amount automatically. You will need to click the request a total from seller option whilst checking out so I can set it to the correct amount before you complete the payment. I do issue refunds on multiple orders if a total isn't requested. However ebay don't refund their fee on partial refunds so I have to deduct their fee (11%) from the saving.
We aim to process, pack and dispatch your orders in the shortest time possible, most orders will be dispatched within 1 business day. Orders placed on Saturday, Sunday or holiday periods will be processed on the next working day. Where an estimated timescale for delivery is provided, this is an estimate only and your items may be delayed in being received due to circumstances beyond our control (such as a courier delay, or at busy times). DWR plastics ltd shall not be under any liability to the Purchaser in respect of delay in delivery howsoever rising.